Vulnerabilities

On QFX10000 Series devices using Juniper Networks Junos OS when configured as transit IP/MPLS penultimate hop popping (PHP) nodes with link aggregation group (LAG) interfaces, an Improper Validation of Specified Index, Position, or Offset in Input weakness allows an attacker sending certain IP packets to cause multiple interfaces in the LAG to detach causing a Denial of Service (DoS) condition. Continued receipt and processing of these packets will sustain the Denial of Service. This issue affects IPv4 and IPv6 packets. Packets of either type can cause and sustain the DoS event. These packets can be destined to the device or be transit packets. On devices such as the QFX10008 with line cards, line cards can be restarted to restore service. On devices such as the QFX10002 you can restart the PFE service, or reboot device to restore service. This issue affects: Juniper Networks Junos OS on QFX10000 Series: All versions prior to 15.1R7-S11; 18.4 versions prior to 18.4R2-S10, 18.4R3-S10; 19.1 versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S4; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S1. An indicator of compromise may be seen by issuing the command: request pfe execute target fpc0 command "show jspec pechip[3] registers ps l2_node 10" timeout 0 | refresh 1 | no-more and reviewing for backpressured output; for example: GOT: 0x220702a8 pe.ps.l2_node[10].pkt_cnt 00000076 GOT: 0x220702b4 pe.ps.l2_node[10].backpressured 00000002

A Use After Free vulnerability in the Routing Protocol Daemon (rdp) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker to cause Denial of Service (DoS). When a BGP session flap happens, a Use After Free of a memory location that was assigned to another object can occur, which will lead to an rpd crash. This is a race condition that is outside of the attacker's control and cannot be deterministically exploited. Continued flapping of BGP sessions can create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS: All versions prior to 18.4R2-S9, 18.4R3-S11; 19.1 versions prior to 19.1R3-S8; 19.2 version 19.2R1 and later versions; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S6; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R2-S1, 21.2R3. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S4-EVO; 21.1-EVO versions prior to 21.1R3-S2-EVO; 21.2-EVO versions prior to 21.2R3-EVO; 21.3-EVO versions prior to 21.3R2-EVO.

Due to an issue with incorrect sudo permissions, Zimbra Collaboration Suite (ZCS) suffers from a local privilege escalation issue in versions 9.0.0 and prior, where the 'zimbra' user can effectively coerce postfix into running arbitrary commands as 'root'.

ZGR TPS200 NG in its 2.00 firmware version and 1.01 hardware version, does not properly accept specially constructed requests. This allows an attacker with access to the network where the affected asset is located, to operate and change several parameters without having to be registered as a user on the web that owns the device.

Rockwell Automation FactoryTalk VantagePoint versions 8.0, 8.10, 8.20, 8.30, 8.31 are vulnerable to an input validation vulnerability. The FactoryTalk VantagePoint SQL Server lacks input validation when users enter SQL statements to retrieve information from the back-end database. If successfully exploited, this could allow a user with basic user privileges to perform remote code execution on the server.

The integrated server of the ZGR TPS200 NG on its 2.00 firmware version and 1.01 hardware version, allows a remote attacker to perform actions with the permissions of a victim user. For this to happen, the victim user has to have an active session and triggers the malicious request.

ZGR TPS200 NG in its 2.00 firmware version and 1.01 hardware version, allows a remote attacker with access to the web application and knowledge of the routes (URIs) used by the application, to access sensitive information about the system.

In ZGR TPS200 NG 2.00 firmware version and 1.01 hardware version, the firmware upload process does not perform any type of restriction. This allows an attacker to modify it and re-upload it via web with malicious modifications, rendering the device unusable.

kkFileView 4.0 is vulnerable to Cross Site Scripting (XSS) via controller\ Filecontroller.java.

Open Source SACCO Management System v1.0 is vulnerable to SQL Injection via /sacco_shield/manage_payment.php.

Online Tours & Travels Management System v1.0 is vulnerable to Arbitrary code execution via ip/tour/admin/operations/update_settings.php.

xzs v3.8.0 was discovered to contain a cross-site scripting (XSS) vulnerability in the component /admin/question/edit. This vulnerability allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Title text field.