Vulnerabilities

With the aim of informing, warning and helping professionals with the latest security vulnerabilities in technology systems, we have made a database available for users interested in this information, which is in Spanish and includes all of the latest documented and recognised vulnerabilities.

This repository, with over 75,000 registers, is based on the information from the NVD (National Vulnerability Database) – by virtue of a partnership agreement – through which INCIBE translates the included information into Spanish.

On occasions this list will show vulnerabilities that have still not been translated, as they are added while the INCIBE team is still carrying out the translation process. The CVE (Common Vulnerabilities and Exposures) Standard for Information Security Vulnerability Names is used with the aim to support the exchange of information between different tools and databases.

All vulnerabilities collected are linked to different information sources, as well as available patches or solutions provided by manufacturers and developers. It is possible to carry out advanced searches, as there is the option to select different criteria to narrow down the results, some examples being vulnerability types, manufacturers and impact levels, among others.

Through RSS feeds or Newsletters we can be informed daily about the latest vulnerabilities added to the repository. Below there is a list, updated daily, where you can discover the latest vulnerabilities.

CVE-2025-27021

Publication date:

02/07/2025

The misconfiguration in the sudoers configuration of the operating system in Infinera G42 version R6.1.3 allows low privileged OS users to read/write physical memory via devmem command line tool. This could allow sensitive information disclosure, denial of service, and privilege escalation by tampering with kernel memory. Details: The output of "sudo -l" reports the presence of "devmem" command executable as super user without using a password. This command allows to read and write an arbitrary memory area of the target device, specifying an absolute address.

Severity CVSS v4.0: Pending analysis

Last modification:

11/02/2026

CVE-2025-24335

Publication date:

02/07/2025

Nokia Single RAN baseband software versions earlier than 24R1-SR 2.1 MP contain a SOAP message input validation flaw, which in theory could potentially be used for causing resource exhaustion in the Single RAN baseband OAM service. No practical exploit has been detected for this flaw. However, the issue has been corrected starting from release 24R1-SR 2.1 MP by adding sufficient input validation for received SOAP requests, effectively mitigating the reported issue.

Severity CVSS v4.0: Pending analysis

Last modification:

15/04/2026

CVE-2025-24329

Publication date:

02/07/2025

Sending a crafted SOAP "provision" operation message archive field within the Mobile Network Operator (MNO) internal Radio Access Network (RAN) management network can cause path traversal issue in Nokia Single RAN baseband software with versions earlier than release 24R1-SR 1.0 MP. This issue has been corrected to release 24R1-SR 1.0 MP and later. Beginning with release 24R1-SR 1.0 MP, the OAM service software utilizes libarchive APIs with security options enabled, effectively mitigating the reported path traversal issue.

Severity CVSS v4.0: Pending analysis

Last modification:

15/04/2026

CVE-2025-24330

Publication date:

02/07/2025

Sending a crafted SOAP "provision" operation message PlanId field within the Mobile Network Operator (MNO) internal Radio Access Network (RAN) management network can cause path traversal issue in Nokia Single RAN baseband software with versions earlier than release 24R1-SR 1.0 MP. This issue has been corrected to release 24R1-SR 1.0 MP and later. Beginning with release 24R1-SR 1.0 MP, the OAM service software performed PlanId field input validations mitigate the reported path traversal issue.

Severity CVSS v4.0: Pending analysis

Last modification:

15/04/2026

CVE-2025-24331

Publication date:

02/07/2025

The Single RAN baseband OAM service is intended to run as an unprivileged service. However, it initially starts with root privileges and assigns certain capabilities before dropping to an unprivileged level. The capabilities retained from the root period are considered extensive after the privilege drop and, in theory, could potentially allow actions beyond the intended scope of the OAM service. These actions could include gaining root privileges, accessing root-owned files, modifying them as the file owner, and then returning them to root ownership. This issue has been corrected starting from release 24R1-SR 0.2 MP and later. Beginning with release 24R1-SR 0.2 MP, the OAM service software capabilities are restricted to the minimum necessary.

Severity CVSS v4.0: Pending analysis

Last modification:

15/04/2026

CVE-2025-24332

Publication date:

02/07/2025

Nokia Single RAN AirScale baseband allows an authenticated administrative user access to all physical boards after performing a single login to the baseband system board. The baseband does not re-authenticate the user when they connect from the baseband system board to the baseband capacity boards using the internal bsoc SSH service, which is available only internally within the baseband and through the internal backplane between the boards. The bsoc SSH allows login from one board to another via the baseband internal backplane using an SSH private key present on the baseband system board. This bsoc SSH capability was previously considered an administrative functionality but has now been restricted to be available only to baseband root-privileged administrators. This restriction mitigates the possibility of misuse with lower-level privileges (e.g., from baseband software images). This mitigation is included starting from release 23R4-SR 3.0 MP and later

Severity CVSS v4.0: Pending analysis

Last modification:

15/04/2026

CVE-2025-24333

Publication date:

02/07/2025

Nokia Single RAN baseband software earlier than 24R1-SR 1.0 MP contains administrative shell input validation fault, which authenticated admin user can, in theory, potentially use for injecting arbitrary commands for unprivileged baseband OAM service process execution via special characters added to baseband internal COMA_config.xml file. This issue has been corrected starting from release 24R1-SR 1.0 MP and later, by adding proper input validation to OAM service process which prevents injecting special characters via baseband internal COMA_config.xml file.

Severity CVSS v4.0: Pending analysis

Last modification:

15/04/2026

CVE-2025-24334

Publication date:

02/07/2025

The Nokia Single RAN baseband software earlier than 23R2-SR 1.0 MP can be made to reveal the exact software release version by sending a specific HTTP POST request through the Mobile Network Operator (MNO) internal RAN management network.

Severity CVSS v4.0: Pending analysis

Last modification:

15/04/2026

CVE-2025-24328

Publication date:

02/07/2025

Sending a crafted SOAP "set" operation message within the Mobile Network Operator (MNO) internal Radio Access Network (RAN) management network can cause Nokia Single RAN baseband OAM service component restart with software versions earlier than release 24R1-SR 1.0 MP. This issue has been corrected to release 24R1-SR 1.0 MP and later. The OAM service component restarts automatically after the stack overflow without causing a base station restart or network service degradation, and without leaving any permanent impact on the Nokia Single RAN baseband OAM service.

Severity CVSS v4.0: Pending analysis

Last modification:

15/04/2026

CVE-2025-6017

Publication date:

02/07/2025

A flaw was found in Red Hat Advanced Cluster Management through versions 2.10, before 2.10.7, 2.11, before 2.11.4, and 2.12, before 2.12.4. This vulnerability allows an unprivileged user to view confidential managed cluster credentials through the UI. This information should only be accessible to authorized users and may result in the loss of confidentiality of administrative information, which could be leaked to unauthorized actors.

Severity CVSS v4.0: Pending analysis

Last modification:

20/08/2025

CVE-2024-13786

Publication date:

02/07/2025

The education theme for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 3.6.10 via deserialization of untrusted input in the &#39;themerex_callback_view_more_posts&#39; function. This makes it possible for unauthenticated attackers to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present.

Severity CVSS v4.0: Pending analysis

Last modification:

15/04/2026

CVE-2025-6464

Publication date:

02/07/2025

The Forminator Forms – Contact Form, Payment Form & Custom Form Builder plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 1.44.2 via deserialization of untrusted input in the &#39;entry_delete_upload_files&#39; function. This makes it possible for unauthenticated attackers to inject a PHP Object through a PHAR file. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. Deserialization occurs when the form submission is deleted, whether by an Administrator or via auto-deletion determined by plugin settings.

Severity CVSS v4.0: Pending analysis

Last modification:

07/07/2025

Subscribe to Vulnerabilities