Vulnerabilities

A Missing Release of Memory after Effective Lifetime vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause a Denial of Service (DoS). On all Junos platforms, the Kernel Routing Table (KRT) queue can get stuck due to a memory leak triggered by interface flaps or route churn leading to RIB and PFEs getting out of sync. The memory leak causes RTNEXTHOP/route and next-hop memory pressure issue and the KRT queue will eventually get stuck with the error- 'ENOMEM -- Cannot allocate memory'. The out-of-sync state between RIB and FIB can be seen with the "show route" and "show route forwarding-table" command. This issue will lead to failures for adding new routes. The KRT queue status can be checked using the CLI command "show krt queue": user@host > show krt state High-priority add queue: 1 queued ADD nhtype Router index 0 (31212) error 'ENOMEM -- Cannot allocate memory' kqp '0x8ad5e40' The following messages will be observed in /var/log/messages, which indicate high memory for routes/nexthops: host rpd[16279]: RPD_RT_HWM_NOTICE: New RIB highwatermark for routes: 266 [2022-03-04 05:06:07] host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host rpd[16279]: RPD_KRT_Q_RETRIES: nexthop ADD: Cannot allocate memory host kernel: rts_veto_net_delayed_unref_limit: Route/nexthop memory is severe pressure. User Application to perform recovery actions. O p 8 err 12, rtsm_id 0:-1, msg type 10, veto simulation: 0. host kernel: rts_veto_net_delayed_unref_limit: Memory usage of M_RTNEXTHOP type = (806321208) Max size possible for M_RTNEXTHOP type = (689432176) Current delayed unref = (0), Max delayed unref on this platform = (120000) Current delayed weight unref = (0) Max delayed weight unref on this platform = (400000) curproc = rpd. This issue affects: Juniper Networks Junos OS 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R2-S1, 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2; This issue does not affect Juniper Networks Junos OS versions prior to 21.2R1.

An Allocation of Resources Without Limits or Throttling vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved allows unauthenticated network based attacker to cause a Denial of Service (DoS). On all Junos Evolved platforms hostbound protocols will be impacted by a high rate of specific hostbound traffic from ports on a PFE. Continued receipt of this amount of traffic will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS Evolved: 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 21.2R1.

A vulnerability in Handling of Undefined Values in the routing protocol daemon (RPD) process of Juniper Networks Junos OS and Junos OS Evolved may allow an unauthenticated network-based attacker to crash the RPD process by sending a specific BGP update while the system is under heavy load, leading to a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. Malicious exploitation of this issue requires a very specific combination of load, timing, and configuration of the vulnerable system which is beyond the direct control of the attacker. Internal reproduction has only been possible through artificially created load and specially instrumented source code. Systems are only vulnerable to this issue if BGP multipath is enabled. Routers not configured for BGP multipath are not vulnerable to this issue. This issue affects: Juniper Networks Junos OS: 21.1 versions prior to 21.1R3-S1; 21.2 versions prior to 21.2R2-S2, 21.2R3; 21.3 versions prior to 21.3R2, 21.3R3; 21.4 versions prior to 21.4R1-S1, 21.4R2. Juniper Networks Junos OS Evolved: 21.1 versions prior to 21.1R3-S1-EVO; 21.2 version 21.2R1-EVO and later versions; 21.3 versions prior to 21.3R3-EVO; 21.4 versions prior to 21.4R1-S1-EVO, 21.4R2-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 21.1. Juniper Networks Junos OS Evolved versions prior to 21.1-EVO.

An Improper Input Validation vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent attacker to cause a PFE crash and thereby a Denial of Service (DoS). An FPC will crash and reboot after receiving a specific transit IPv6 packet over MPLS. Continued receipt of this packet will create a sustained Denial of Service (DoS) condition. This issue does not affect systems configured for IPv4 only. This issue affects: Juniper Networks Junos OS All versions prior to 12.3R12-S21; 15.1 versions prior to 15.1R7-S10; 17.3 versions prior to 17.3R3-S12; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S3-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R2-S1-EVO, 21.3R3-EVO; 21.4 versions prior to 21.4R2-EVO.

A Missing Release of File Descriptor or Handle after Effective Lifetime vulnerability in plugable authentication module (PAM) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). It is possible that after the termination of a gRPC connection the respective/var/run/.env file is not getting deleted which if occurring repeatedly can cause inode exhaustion. Inode exhaustion can present itself in two different ways: 1. The following log message can be observed: host kernel: pid (), uid inumber on /.mount/var: out of inodes which by itself is a clear indication. 2. The following log message can be observed: host []: ... : No space left on device which is not deterministic and just a representation of a write error which could have several reasons. So the following check needs to be done: user@host> show system storage no-forwarding Filesystem Size Used Avail Capacity Mounted on /dev/ada1p1 475M 300M 137M 69% /.mount/var which indicates that the write error is not actually due to a lack of disk space. If either 1. or 2. has been confirmed, then the output of: user@host> file list /var/run/*.env | count need to be checked and if it indicates a high (>10000) number of files the system has been affected by this issue. This issue affects: Juniper Networks Junos OS All versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S4; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-EVO; 21.1 versions prior to 21.1R3-S1-EVO; 21.2 versions prior to 21.2R1-S1-EVO, 21.2R2-EVO.

A Buffer Overflow vulnerability in the PFE of Juniper Networks Junos OS on SRX series allows an unauthenticated network based attacker to cause a Denial of Service (DoS). The PFE will crash when specific traffic is scanned by Enhanced Web Filtering safe-search feature of UTM (Unified Threat management). Continued receipt of this specific traffic will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS: 20.2 versions prior to 20.2R3-S4 on SRX Series; 20.3 versions prior to 20.3R3-S3 on SRX Series; 20.4 versions prior to 20.4R3-S3 on SRX Series; 21.1 versions prior to 21.1R3-S1 on SRX Series; 21.2 versions prior to 21.2R2-S2, 21.2R3 on SRX Series; 21.3 versions prior to 21.3R2 on SRX Series; 21.4 versions prior to 21.4R2 on SRX Series. This issue does not affect Juniper Networks Junos OS versions prior to 20.2R1.

A NULL Pointer Dereference vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on QFX5000 Series and MX Series allows an unauthenticated adjacent attacker to cause a Denial of Service (DoS). On QFX5K Series and MX Series, when the PFE receives a specific VxLAN packet the Layer 2 Address Learning Manager (L2ALM) process will crash leading to an FPC reboot. Continued receipt of this specific packet will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks Junos OS on QFX5000 Series, MX Series: 20.3 versions prior to 20.3R3-S3; 20.4 versions prior to 20.4R3-S2; 21.2 versions prior to 21.2R2-S1. This issue does not affect Juniper Networks Junos OS: All versions prior to 20.3R1; 21.1 version 21.1R1 and later versions.

H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the URL /ihomers/app.

H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the INTF parameter at /doping.asp.

H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the ajaxmsg parameter at /AJAX/ajaxget.

H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the HOST parameter at /doping.asp.

H3C Magic R200 R200V200R004L02 was discovered to contain a stack overflow via the EditvsList parameter at /dotrace.asp.