Vulnerabilities

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based, attacker to cause Denial of Service (DoS). A PFE crash will happen when a GPRS Tunnel Protocol (GTP) packet is received with a malformed field in the IP header of GTP encapsulated General Packet Radio Services (GPRS) traffic. The packet needs to match existing state which is outside the attackers control, so the issue cannot be directly exploited. The issue will only be observed when endpoint address validation is enabled. This issue affects Juniper Networks Junos OS on SRX Series: 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S4; 20.4 versions prior to 20.4R3-S3; 21.1 versions prior to 21.1R3-S2; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2; 22.1 versions prior to 22.1R1-S1, 22.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.2R1.

A NULL Pointer Dereference vulnerability in the Packet Forwarding Engine of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). On SRX Series If Unified Threat Management (UTM) Enhanced Content Filtering (CF) is enabled and specific transit traffic is processed the PFE will crash and restart. This issue affects Juniper Networks Junos OS: 21.4 versions prior to 21.4R1-S2, 21.4R2 on SRX Series; 22.1 versions prior to 22.1R1-S1, 22.1R2 on SRX Series. This issue does not affect Juniper Networks Junos OS versions prior to 21.4R1.

An Improper Input Validation vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent unauthenticated attacker to cause DoS (Denial of Service). If another router generates more than one specific valid OSPFv3 LSA then rpd will crash while processing these LSAs. This issue only affects systems configured with OSPFv3, while OSPFv2 is not affected. This issue affects: Juniper Networks Junos OS 19.2 versions prior to 19.2R3-S6; 19.3 version 19.3R2 and later versions; 19.4 versions prior to 19.4R2-S8, 19.4R3-S9; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S2; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3-S2; 21.4 versions prior to 21.4R2. Juniper Networks Junos OS Evolved All versions prior to 20.4R3-S5-EVO; 21.1-EVO versions prior to 21.1R3-S2-EVO; 21.2-EVO versions prior to 21.2R3-S1-EVO; 21.3-EVO versions prior to 21.3R3-S2-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO; 22.2-EVO versions prior to 22.2R2-EVO. This issue does not affect Juniper Networks Junos OS 19.2 versions prior to 19.2R2.

An Improper Validation of Specified Type of Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS allows an attacker to cause an RPD memory leak leading to a Denial of Service (DoS). This memory leak only occurs when the attacker's packets are destined to any configured IPv6 address on the device. This issue affects: Juniper Networks Junos OS 21.1 versions prior to 21.1R3-S2; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2; 22.1 versions prior to 22.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 21.1R1.

An Unchecked Return Value to NULL Pointer Dereference vulnerability in Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a locally authenticated attacker with low privileges to cause a Denial of Service (DoS). In Segment Routing (SR) to Label Distribution Protocol (LDP) interworking scenario, configured with Segment Routing Mapping Server (SRMS) at any node, when an Area Border Router (ABR) leaks the SRMS entries having "S" flag set from IS-IS Level 2 to Level 1, an rpd core might be observed when a specific low privileged CLI command is issued. This issue affects: Juniper Networks Junos OS 21.4 versions prior to 21.4R1-S2, 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved 21.4-EVO versions prior to 21.4R1-S2-EVO, 21.4R2-S1-EVO, 21.4R3-EVO; 22.1-EVO versions prior to 22.1R2-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 21.4R1. Juniper Networks Junos OS Evolved versions prior to 21.4R1-EVO.

An Unchecked Return Value to NULL Pointer Dereference vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). On SRX Series if Unified Threat Management (UTM) Enhanced Content Filtering (CF) and AntiVirus (AV) are enabled together and the system processes specific valid transit traffic the Packet Forwarding Engine (PFE) will crash and restart. This issue affects Juniper Networks Junos OS 21.4 versions prior to 21.4R1-S2, 21.4R2 on SRX Series. This issue does not affect Juniper Networks Junos OS versions prior to 21.4R1.

In VxLAN scenarios on EX4300-MP, EX4600, QFX5000 Series devices an Uncontrolled Memory Allocation vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated adjacently located attacker sending specific packets to cause a Denial of Service (DoS) condition by crashing one or more PFE's when they are received and processed by the device. Upon automatic restart of the PFE, continued processing of these packets will cause the memory leak to reappear. Depending on the volume of packets received the attacker may be able to create a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS on EX4300-MP, EX4600, QFX5000 Series: 17.1 version 17.1R1 and later versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R2-S13, 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R2-S6, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S7, 19.2R3-S1; 19.3 versions prior to 19.3R2-S6, 19.3R3-S1; 19.4 versions prior to 19.4R1-S4, 19.4R2-S4, 19.4R3-S1; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2. This issue does not affect Junos OS versions prior to 17.1R1.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS Evolved on ACX7000 Series allows an unauthenticated network-based attacker to cause a partial Denial of Service (DoS). On receipt of specific IPv6 transit traffic, Junos OS Evolved on ACX7100-48L, ACX7100-32C and ACX7509 sends this traffic to the Routing Engine (RE) instead of forwarding it, leading to increased CPU utilization of the RE and a partial DoS. This issue only affects systems configured with IPv6. This issue does not affect ACX7024 which is supported from 22.3R1-EVO onwards where the fix has already been incorporated as indicated in the solution section. This issue affects Juniper Networks Junos OS Evolved on ACX7100-48L, ACX7100-32C, ACX7509: 21.1-EVO versions prior to 21.1R3-S2-EVO; 21.2-EVO versions prior to 21.2R3-S2-EVO; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R1-S1-EVO, 21.4R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 21.1R1-EVO.

A limitless resource allocation vulnerability in FPC resources of Juniper Networks Junos OS Evolved on PTX Series allows an unprivileged attacker to cause Denial of Service (DoS). Continuously polling the SNMP jnxCosQstatTable causes the FPC to run out of GUID space, causing a Denial of Service to the FPC resources. When the FPC runs out of the GUID space, you will see the following syslog messages. The evo-aftmand-bt process is asserting. fpc1 evo-aftmand-bt[17556]: %USER-3: get_next_guid: Ran out of Guid Space start 1748051689472 end 1752346656767 fpc1 audit[17556]: %AUTH-5: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 kernel: %KERN-5: audit: type=1701 audit(1648567505.119:57): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=17556 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=6 fpc1 emfd-fpa[14438]: %USER-5: Alarm set: APP color=red, class=CHASSIS, reason=Application evo-aftmand-bt fail on node Fpc1 fpc1 emfd-fpa[14438]: %USER-3-EMF_FPA_ALARM_REP: RaiseAlarm: Alarm(Location: /Chassis[0]/Fpc[1] Module: sysman Object: evo-aftmand-bt:0 Error: 2) reported fpc1 sysepochman[12738]: %USER-5-SYSTEM_REBOOT_EVENT: Reboot [node] [ungraceful reboot] [evo-aftmand-bt exited] The FPC resources can be monitored using the following commands: user@router> start shell [vrf:none] user@router-re0:~$ cli -c "show platform application-info allocations app evo-aftmand-bt" | grep ^fpc | grep -v Route | grep -i -v Nexthop | awk '{total[$1] += $5} END { for (key in total) { print key " " total[key]/4294967296 }}' Once the FPCs become unreachable they must be manually restarted as they do not self-recover. This issue affects Juniper Networks Junos OS Evolved on PTX Series: All versions prior to 20.4R3-S4-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO version 21.2R1-EVO and later versions; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO.

Due to the Improper Handling of an Unexpected Data Type in the processing of EVPN routes on Juniper Networks Junos OS and Junos OS Evolved, an attacker in direct control of a BGP client connected to a route reflector, or via a machine in the middle (MITM) attack, can send a specific EVPN route contained within a BGP Update, triggering a routing protocol daemon (RPD) crash, leading to a Denial of Service (DoS) condition. Continued receipt and processing of these specific EVPN routes could create a sustained Denial of Service (DoS) condition. This issue only occurs on BGP route reflectors, only within a BGP EVPN multicast environment, and only when one or more BGP clients have 'leave-sync-route-oldstyle' enabled. This issue affects: Juniper Networks Junos OS 21.3 versions prior to 21.3R3-S2; 21.4 versions prior to 21.4R2-S2, 21.4R3; 22.1 versions prior to 22.1R1-S2, 22.1R3; 22.2 versions prior to 22.2R2. Juniper Networks Junos OS Evolved 21.3 version 21.3R1-EVO and later versions prior to 21.4R3-EVO; 22.1 versions prior to 22.1R1-S2-EVO, 22.1R3-EVO; 22.2 versions prior to 22.2R2-EVO. This issue does not affect: Juniper Networks Junos OS versions prior to 21.3R1. Juniper Networks Junos OS Evolved versions prior to 21.3R1-EVO.

An Improper Check or Handling of Exceptional Conditions vulnerability in the processing of a malformed OSPF TLV in Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause the periodic packet management daemon (PPMD) process to go into an infinite loop, which in turn can cause protocols and functions reliant on PPMD such as OSPF neighbor reachability to be impacted, resulting in a sustained Denial of Service (DoS) condition. The DoS condition persists until the PPMD process is manually restarted. This issue affects: Juniper Networks Junos OS: All versions prior to 19.1R3-S9; 19.2 versions prior to 19.2R3-S5; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S9; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R3-S1; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2. Juniper Networks Junos OS Evolved: All versions prior to 20.4R3-S3-EVO; 21.1 versions prior to 21.1R2-EVO.

An Improper Validation of Specified Index, Position, or Offset in Input vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated network-based attacker to cause a Denial of Service (DoS). On SRX5000 Series with SPC3, SRX4000 Series, and vSRX, when PowerMode IPsec is configured and a malformed ESP packet matching an established IPsec tunnel is received the PFE crashes. This issue affects Juniper Networks Junos OS on SRX5000 Series with SPC3, SRX4000 Series, and vSRX: All versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S4; 20.3 versions prior to 20.3R3-S3; 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R1-S2, 21.3R2.