Vulnerabilities

On SRX Series devices during compilation of IDP policies, an attacker sending specially crafted packets may be able to bypass firewall rules, leading to information disclosure which an attacker may use to gain control of the target device or other internal devices, systems or services protected by the SRX Series device. This issue only applies to devices where IDP policies are applied to one or more rules. Customers not using IDP policies are not affected. Depending on if the IDP updates are automatic or not, as well as the interval between available updates, an attacker may have more or less success in performing reconnaissance or bypass attacks on the victim SRX Series device or protected devices. ScreenOS with IDP is not vulnerable to this issue. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D60 on SRX; 12.3X48 versions prior to 12.3X48-D35 on SRX; 15.1X49 versions prior to 15.1X49-D60 on SRX.

A vulnerability in Junos OS SNMP MIB-II subagent daemon (mib2d) may allow a remote network based attacker to cause the mib2d process to crash resulting in a denial of service condition (DoS) for the SNMP subsystem. While a mib2d process crash can disrupt the network monitoring via SNMP, it does not impact routing, switching or firewall functionalities. SNMP is disabled by default on devices running Junos OS. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D76; 12.3 versions prior to 12.3R12-S7, 12.3R13; 12.3X48 versions prior to 12.3X48-D65; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D130; 15.1 versions prior to 15.1F2-S20, 15.1F6-S10, 15.1R7; 15.1X49 versions prior to 15.1X49-D130; 15.1X53 versions prior to 15.1X53-D233, 15.1X53-D471, 15.1X53-D472, 15.1X53-D58, 15.1X53-D66; 16.1 versions prior to 16.1R5-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D47; 16.1X70 versions prior to 16.1X70-D10; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R2-S6, 17.1R3;

Junos OS may be impacted by the receipt of a malformed BGP UPDATE which can lead to a routing process daemon (rpd) crash and restart. Receipt of a repeated malformed BGP UPDATEs can result in an extended denial of service condition for the device. This malformed BGP UPDATE does not propagate to other BGP peers. Affected releases are Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1F6-S10, 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D130 on SRX; 15.1X53 versions prior to 15.1X53-D66 on QFX10K; 15.1X53 versions prior to 15.1X53-D58 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471 on NFX; 16.1 versions prior to 16.1R3-S8, 16.1R4-S9, 16.1R5-S3, 16.1R6-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D47; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R2-S3, 17.1R3; 17.2 versions prior to 17.2R1-S3, 17.2R2-S1, 17.2R3; 17.2X75 versions prior to 17.2X75-D70; 13.2 versions above and including 13.2R1. Versions prior to 13.2R1 are not affected. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. No other Juniper Networks products or platforms are affected by this issue.

If all 64 digits of the connectivity association name (CKN) key or all 32 digits of the connectivity association key (CAK) key are not configured, all remaining digits will be auto-configured to 0. Hence, Juniper devices configured with short MacSec keys are at risk to an increased likelihood that an attacker will discover the secret passphrases configured for these keys through dictionary-based and brute-force-based attacks using spoofed packets. Affected releases are Juniper Networks Junos OS: 14.1 versions prior to 14.1R10, 14.1R9; 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D100; 15.1X53 versions prior to 15.1X53-D59; 16.1 versions prior to 16.1R3-S8, 16.1R4-S8, 16.1R5; 16.2 versions prior to 16.2R1-S6, 16.2R2; 17.1 versions prior to 17.1R2.

A Junos device with VPLS routing-instances configured on one or more interfaces may be susceptible to an mbuf leak when processing a specific MPLS packet. Approximately 1 mbuf is leaked per each packet processed. The number of mbufs is platform dependent. The following command provides the number of mbufs that are currently in use and maximum number of mbufs that can be allocated on a platform: > show system buffers 2437/3143/5580 mbufs in use (current/cache/total) Once the device runs out of mbufs it will become inaccessible and a restart will be required. This issue only affects end devices, transit devices are not affected. Affected releases are Juniper Networks Junos OS with VPLS configured running: 12.1X46 versions prior to 12.1X46-D76; 12.3X48 versions prior to 12.3X48-D66, 12.3X48-D70; 14.1 versions prior to 14.1R9; 14.1X53 versions prior to 14.1X53-D47; 14.2 versions prior to 14.2R8; 15.1 versions prior to 15.1F2-S19, 15.1F6-S10, 15.1R4-S9, 15.1R5-S7, 15.1R6-S4, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140; 15.1X53 versions prior to 15.1X53-D58 on EX2300/EX3400; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D471 on NFX; 15.1X53 versions prior to 15.1X53-D66 on QFX10; 16.1 versions prior to 16.1R3-S8, 16.1R4-S6, 16.1R5; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S6, 17.1R3; 17.2 versions prior to 17.2R1-S5, 17.2R2.

JSNAPy is an open source python version of Junos Snapshot Administrator developed by Juniper available through github. The default configuration and sample files of JSNAPy automation tool versions prior to 1.3.0 are created world writable. This insecure file and directory permission allows unprivileged local users to alter the files under this directory including inserting operations not intended by the package maintainer, system administrator, or other users. This issue only affects users who downloaded and installed JSNAPy from github.

OpenShift Enterprise version 3.x is vulnerable to a stored XSS via the log viewer for pods. The flaw is due to lack of sanitation of user input, specifically terminal escape characters, and the creation of clickable links automatically when viewing the log files for a pod.

joyplus-cms 1.6.0 allows remote attackers to obtain sensitive information via a direct request to the install/ or log/ URI.

The WeChat module in YzmCMS 3.7.1 has reflected XSS via the admin/module/init.html echostr parameter, related to the valid function in application/wechat/controller/index.class.php.

CA Workload Automation AE before r11.3.6 SP7 allows remote attackers to a perform SQL injection via a crafted HTTP request.

CA Workload Control Center before r11.4 SP6 allows remote attackers to execute arbitrary code via a crafted HTTP request.

S12700 V200R005C00, V200R006C00, V200R006C01, V200R007C00, V200R007C01, V200R007C20, V200R008C00, V200R008C06, V200R009C00, V200R010C00, S7700 V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R006C01, V200R007C00, V200R007C01, V200R008C00, V200R008C06, V200R009C00, V200R010C00, S9700 V200R001C00, V200R001C01, V200R002C00, V200R003C00, V200R005C00, V200R006C00, V200R006C01, V200R007C00, V200R007C01, V200R008C00, V200R009C00, V200R010C00 have an improper authorization vulnerability on Huawei switch products. The system incorrectly performs an authorization check when a normal user attempts to access certain information which is supposed to be accessed only by authenticated user. Successful exploit could cause information disclosure.