Vulnerabilidades

*** Pendiente de traducción *** An Improper Check or Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS on QFX10002 allows an unauthenticated, adjacent attacker on the local broadcast domain sending a malformed packet to the device, causing all PFEs other than the inbound PFE to wedge and to eventually restart, resulting in a Denial of Service (DoS) condition. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue can only be triggered by sending a specific malformed packet to the device. Transit traffic does not trigger this issue. An indication of this issue occurring can be seen through the following log messages: fpc0 expr_hostbound_packet_handler: Receive pe 73? fpc0 Cmerror Op Set: PE Chip: PE0[0]: PGQ:misc_intr: 0x00000020: Enqueue of a packet with out-of-range VOQ in 192K-VOQ mode (URI: /fpc/0/pfe/0/cm/0/PE_Chip/0/PECHIP_CMERROR_PGQ_MISC_INT_EVENTS_ENQ_192K_VIOL) The logs list below can also be observed when this issue occurs fpc0 Error: /fpc/0/pfe/0/cm/0/PE_Chip/0/PECHIP_CMERROR_PGQ_MISC_INT_EVENTS_ENQ_192K_VIOL (0x210107), scope: pfe, category: functional, severity: major, module: PE Chip, type: Description for PECHIP_CMERROR_PGQ_MISC_INT_EVENTS_ENQ_192K_VIOL fpc0 Performing action cmalarm for error /fpc/0/pfe/0/cm/0/PE_Chip/0/PECHIP_CMERROR_PGQ_MISC_INT_EVENTS_ENQ_192K_VIOL (0x210107) in module: PE Chip with scope: pfe category: functional level: major fpc0 Error: /fpc/0/pfe/0/cm/0/PE_Chip/0/PECHIP_CMERROR_CM_INT_REG_DCHK_PIPE (0x21011a), scope: pfe, category: functional, severity: fatal, module: PE Chip, type: Description for PECHIP_CMERROR_CM_INT_REG_DCHK_PIPE fpc0 Performing action cmalarm for error /fpc/0/pfe/0/cm/0/PE_Chip/0/PECHIP_CMERROR_CM_INT_REG_DCHK_PIPE (0x21011a) in module: PE Chip with scope: pfe category: functional level: fatal fpc0 Performing action disable-pfe for error /fpc/0/pfe/0/cm/0/PE_Chip/0/PECHIP_CMERROR_CM_INT_REG_DCHK_PIPE (0x21011a) in module: PE Chip with scope: pfe category: functional level: fatal This issue affects Juniper Networks Junos OS on QFX10002: All versions prior to 19.1R3-S10; 19.4 versions prior to 19.4R3-S11; 20.2 versions prior to 20.2R3-S7; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S2; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

*** Pendiente de traducción *** An Incorrect Permission Assignment for Critical Resource vulnerability in Juniper Networks Junos OS Evolved allows a local, authenticated low-privileged attacker to copy potentially malicious files into an existing Docker container on the local system. A follow-on administrator could then inadvertently start the Docker container leading to the malicious files being executed as root. This issue only affects systems with Docker configured and enabled, which is not enabled by default. Systems without Docker started are not vulnerable to this issue. This issue affects Juniper Networks Junos OS Evolved: 20.4 versions prior to 20.4R3-S5-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R3-EVO; 21.4 versions prior to 21.4R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 19.2R1-EVO.

*** Pendiente de traducción *** An Improper Handling of Unexpected Data Type vulnerability in IPv6 firewall filter processing of Juniper Networks Junos OS on the ACX Series devices will prevent a firewall filter with the term 'from next-header ah' from being properly installed in the packet forwarding engine (PFE). There is no immediate indication of an incomplete firewall filter commit shown at the CLI, which could allow an attacker to send valid packets to or through the device that were explicitly intended to be dropped. An indication that the filter was not installed can be identified with the following logs: fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_rule_prepare : Config failed: Unsupported Ip-protocol 51 in the filter lo0.0-inet6-i fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_rule_prepare : Please detach the filter, remove unsupported match and re-attach fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_process_rule : Status:104 dnx_dfw_rule_prepare failed fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_process_filter : Status:104 dnx_dfw_process_rule failed fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_update_filter_in_hw : Status:104 Could not process filter(lo0.0-inet6-i) for rule expansion Unsupported match, action present. fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_create_hw_instance : Status:104 Could not program dfw(lo0.0-inet6-i) type(IFP_DFLT_INET6_Lo0_FILTER)! [104] fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_bind_shim : [104] Could not create dfw(lo0.0-inet6-i) type(IFP_DFLT_INET6_Lo0_FILTER) fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_update_resolve : [100] Failed to bind filter(3) to bind point fpc0 ACX_DFW_CFG_FAILED: ACX Error (dfw):dnx_dfw_change_end : dnx_dfw_update_resolve (resolve type) failed This issue affects Juniper Networks Junos OS on ACX Series: All versions prior to 20.2R3-S7; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R2.

*** Pendiente de traducción *** An Improper Authentication vulnerability in upload-file.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to upload arbitrary files to temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

*** Pendiente de traducción *** There exists a reflected XSS within the logout functionality of ServiceNow versions lower than Quebec Patch 10 Hotfix 11b, Rome Patch 10 Hotfix 3b, San Diego Patch 9, Tokyo Patch 4, and Utah GA. This enables an unauthenticated remote attacker to execute arbitrary JavaScript code in the browser-based web console.

*** Pendiente de traducción *** Buffer-overflow in jsdtoa.c in Artifex MuJS in versions 1.0.1 to 1.1.1. An integer overflow happens when js_strtod() reads in floating point exponent, which leads to a buffer overflow in the pointer *d.

*** Pendiente de traducción *** An Improper Handling of Missing Values vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause a dcpfe process core and thereby a Denial of Service (DoS). Continued receipt of these specific frames will cause a sustained Denial of Service condition. This issue occurs when a specific malformed ethernet frame is received. This issue affects Juniper Networks Junos OS on QFX10000 Series, PTX1000 Series Series: All versions prior to 19.4R3-S10; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S1; 22.1 versions prior to 22.1R2-S1, 22.1R3; 22.2 versions prior to 22.2R1-S2, 22.2R2.

*** Pendiente de traducción *** A user may be tricked into opening a malicious FBX file that may exploit a stack buffer overflow vulnerability in Autodesk® FBX® SDK 2020 or prior which may lead to code execution.

*** Pendiente de traducción *** A user may be tricked into opening a malicious FBX file that may exploit a heap buffer overflow vulnerability in Autodesk® FBX® SDK 2020 or prior which may lead to code execution.

*** Pendiente de traducción *** gatsby-plugin-sharp is a plugin for the gatsby framework which exposes functions built on the Sharp image processing library. The gatsby-plugin-sharp plugin prior to versions 5.8.1 and 4.25.1 contains a path traversal vulnerability exposed when running the Gatsby develop server (`gatsby develop`). It should be noted that by default gatsby develop is only accessible via the localhost 127.0.0.1, and one would need to intentionally expose the server to other interfaces to exploit this vulnerability by using server options such as --host 0.0.0.0, -H 0.0.0.0, or the GATSBY_HOST=0.0.0.0 environment variable. Attackers exploiting this vulnerability will have read access to all files within the scope of the server process. A patch has been introduced in gatsby-plugin-sharp@5.8.1 and gatsby-plugin-sharp@4.25.1 which mitigates the issue by ensuring that included paths remain within the project directory. As stated above, by default gatsby develop is only exposed to the localhost 127.0.0.1. For those using the develop server in the default configuration no risk is posed. If other ranges are required, preventing the develop server from being exposed to untrusted interfaces or IP address ranges would mitigate the risk from this vulnerability. Users are non the less encouraged to upgrade to a safe version.

*** Pendiente de traducción *** An Out-Of-Bounds Write Vulnerability in Autodesk® FBX® SDK version 2020 or prior may lead to code execution through maliciously crafted FBX files or information disclosure.

*** Pendiente de traducción *** A malicious actor may convince a victim to open a malicious USD file that may trigger an out-of-bounds write vulnerability which may result in code execution.