Vulnerabilities

Rejected reason: DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2018. Notes: none

The Sky Elite 6.0L+ Android device with a build fingerprint of SKY/x6069_trx_l601_sky/x6069_trx_l601_sky:6.0/MRA58K/1482897127:user/release-keys contains a pre-installed platform app with a package name of com.fw.upgrade.sysoper (versionCode=238, versionName=2.3.8) that contains an exported broadcast receiver app component named com.adups.fota.sysoper.WriteCommandReceiver that allows any app co-located on the device to supply arbitrary commands to be executed as the system user. The com.fw.upgrade.sysoper app cannot be disabled by the user and the attack can be performed by a zero-permission app. Executing commands as system user can allow a third-party app to video record the user's screen, factory reset the device, obtain the user's notifications, read the logcat logs, inject events in the Graphical User Interface (GUI), change the default Input Method Editor (IME) (e.g., keyboard) with one contained within the attacking app that contains keylogging functionality, obtain the user's text messages, and more.

The Vivo V7 Android device with a build fingerprint of vivo/1718/1718:7.1.2/N2G47H/compil11021857:user/release-keys contains a platform app with a package name of com.vivo.bsptest (versionCode=1, versionName=1.0) containing an exported activity app component named com.vivo.bsptest.BSPTestActivity that allows any app co-located on the device to initiate the writing of the logcat log, bluetooth log, and kernel log to external storage. When logging is enabled, there is a notification in the status bar, so it is not completely transparent to the user. The user can cancel the logging, but it can be re-enabled since the app with a package name of com.vivo.bsptest cannot be disabled. The writing of these logs can be initiated by an app co-located on the device, although the READ_EXTERNAL_STORAGE permission is necessary to for an app to access the log files.

The Vivo V7 device with a build fingerprint of vivo/1718/1718:7.1.2/N2G47H/compil11021857:user/release-keys allows any app co-located on the device to set system properties as the com.android.phone user. The com.qualcomm.qti.modemtestmode app (versionCode=25, versionName=7.1.2) that contains an exported service named com.qualcomm.qti.modemtestmode.MbnTestService that allows any app co-located on the device to provide key-value pairs to set certain system properties. Notably, system properties with the persist.* prefix can be set which will survive a reboot. On the Vivo V7 device, when the persist.sys.input.log property is set to have a value of yes, the user's screen touches be written to the logcat log by the InputDispatcher for all apps. The system-wide logcat log can be obtained from external storage via a different known vulnerability on the device. The READ_EXTERNAL_STORAGE permission is necessary to access the log files containing the user's touch coordinates. With some effort, the user's touch coordinates can be mapped to key presses on a keyboard.

The Coolpad Canvas device with a build fingerprint of Coolpad/cp3636a/cp3636a:7.0/NRD90M/093031423:user/release-keys contains a platform app with a package name of com.qualcomm.qti.modemtestmode (versionCode=24, versionName=7.0) that contains an exported service app component named com.qualcomm.qti.modemtestmode.MbnTestService that allows any app on the device to set certain system properties as the com.android.phone user. When an app sets the persist.service.logr.enable system property to a value of 1, an app with a package name of com.yulong.logredirect (versionCode=20160622, versionName=5.25_20160622_01) will start writing the system-wide logcat log, kernel log, and a tcpdump network traffic capture to external storage. Furthermore, on the Coolpad Canvas device, the com.android.phone app writes the destination phone number and body of the text message for outgoing text messages. A notification when logging can be avoided if the log is enabled after device startup and disabled prior to device shutdown by setting the system properties using the exported interface of the com.qualcomm.qti.modemtestmode app. Any app with the READ_EXTERNAL_STORAGE permission can access the log files.

The ZTE Blade Vantage Android device with a build fingerprint of ZTE/Z839/sweet:7.1.1/NMF26V/20180120.095344:user/release-keys, the ZTE Blade Spark Android device with a build fingerprint of ZTE/Z971/peony:7.1.1/NMF26V/20171129.143111:user/release-keys, the ZTE ZMAX Pro Android device with a build fingerprint of ZTE/P895T20/urd:6.0.1/MMB29M/20170418.114928:user/release-keys, and the ZTE ZMAX Champ Android device with a build fingerprint of ZTE/Z917VL/fortune:6.0.1/MMB29M/20170327.120922:user/release-keys contain a pre-installed platform app with a package name of com.android.modem.service (versionCode=25, versionName=7.1.1; versionCode=23, versionName=6.0.1) that exports an interface to any app on co-located on the device. Using the exported interface of the com.android.modem.service app, any app can enable and obtain certain log files (modem and logcat) without the appropriate corresponding access permissions. The modem logs contain the phone number and full text body of incoming and outgoing text messages in binary format. In addition, the modem log contains the phone numbers for both incoming and outgoing phone calls. The system-wide logcat logs (those obtained via the logcat binary) tend to contain sensitive user data. Third-party apps are prevented from directly reading the system-wide logcat logs. The capability to read from the system-wide logcat logs is only available to pre-installed system apps and platform apps. The modem log and/or logcat log, once activated, get written to external storage (SD card). An app aware of this vulnerability can enable the logs, parse them for relevant data, and exfiltrate them from the device. The modem log and logcat log are inactive by default, but a third-party app with no permissions can activate them, although the app will need to be granted the READ_EXTERNAL_STORAGE permission to access them.

The Leagoo Z5C Android device with a build fingerprint of sp7731c_1h10_32v4_bird:6.0/MRA58K/android.20170629.214736:user/release-keys contains a pre-installed app with a package name of com.android.messaging (versionCode=1000110, versionName=1.0.001, (android.20170630.092853-0)) containing an exported content provider named com.android.messaging.datamodel.MessagingContentProvider. Any app co-located on the device can read the most recent text message from each conversation. That is, for each phone number where the user has either sent or received a text message from, a zero-permission third-party app can obtain the body of the text message, phone number, name of the contact (if it exists), and a timestamp for the most recent text message of each conversation. As the querying of the vulnerable content provider app component can be performed silently in the background, a malicious app can continuously monitor the content provider to see if the current message in each conversation has changed to obtain new text messages.

The MXQ TV Box 4.4.2 Android device with a build fingerprint of MBX/m201_N/m201_N:4.4.2/KOT49H/20160106:user/test-keys contains the Android framework with a package name of android (versionCode=19, versionName=4.4.2-20170213) that contains an exported broadcast receiver application component that, when called, will make the device inoperable. The vulnerable component named com.android.server.SystemRestoreReceiver will write a value of --restore_system\n--locale=

The ASUS ZenFone 3 Max Android device with a build fingerprint of asus/US_Phone/ASUS_X008_1:7.0/NRD90M/US_Phone-14.14.1711.92-20171208:user/release-keys contains a pre-installed app with a package name of com.asus.loguploader (versionCode=1570000275, versionName=7.0.0.55_170515). This app contains an exported service app component named com.asus.loguploader.LogUploaderService that, when accessed with a particular action string, will write a bugreport (kernel log, logcat log, and the state of system services including the text of active notifications), Wi-Fi Passwords, and other system data to external storage (sdcard). Any app with the READ_EXTERNAL_STORAGE permission on this device can read this data from the sdcard after it has been dumped there by the com.asus.loguploader. Third-party apps are not allowed to directly create a bugreport or access the user's stored wireless network credentials.

The Leagoo Z5C Android device with a build fingerprint of sp7731c_1h10_32v4_bird:6.0/MRA58K/android.20170629.214736:user/release-keys contains a pre-installed app with a package name of com.android.messaging (versionCode=1000110, versionName=1.0.001, (android.20170630.092853-0)) with an exported broadcast receiver app component named com.android.messaging.trackersender.TrackerSender. Any app co-located on the device, even one with no permissions, can send a broadcast intent with certain embedded data to the exported broadcast receiver application component that will result in the programmatic sending of a text message where the phone number and body of the text message is controlled by the attacker.

The Leagoo Z5C Android device with a build fingerprint of sp7731c_1h10_32v4_bird:6.0/MRA58K/android.20170629.214736:user/release-keys contains a pre-installed platform app with a package name of com.android.settings (versionCode=23, versionName=6.0-android.20170630.092853) that contains an exported broadcast receiver that allows any app co-located on the device to programmatically initiate a factory reset. In addition, the app initiating the factory reset does not require any permissions. A factory reset will remove all user data and apps from the device. This will result in the loss of any data that have not been backed up or synced externally. The capability to perform a factory reset is not directly available to third-party apps (those that the user installs themselves with the exception of enabled Mobile Device Management (MDM) apps), although this capability can be obtained by leveraging an unprotected app component of a pre-installed platform app.

The Leagoo P1 Android device with a build fingerprint of sp7731c_1h10_32v4_bird:6.0/MRA58K/android.20170629.214736:user/release-keys contains a hidden root privilege escalation capability to achieve command execution as the root user. They have made modifications that allow a user with physical access to the device to obtain a root shell via ADB by modifying read-only system properties at runtime. Specifically, modifying the ro.debuggable and the ro.secure system properties to a certain value and then restarting the ADB daemon allows for a root shell to be obtained via ADB.