Vulnerabilidades

Con el objetivo de informar, advertir y ayudar a los profesionales sobre las últimas vulnerabilidades de seguridad en sistemas tecnológicos, ponemos a disposición de los usuarios interesados en esta información una base de datos con información en castellano sobre cada una de las últimas vulnerabilidades documentadas y conocidas.

Este repositorio con más de 75.000 registros esta basado en la información de NVD (National Vulnerability Database) – en función de un acuerdo de colaboración – por el cual desde INCIBE realizamos la traducción al castellano de la información incluida. En ocasiones este listado mostrará vulnerabilidades que aún no han sido traducidas debido a que se recogen en el transcurso del tiempo en el que el equipo de INCIBE realiza el proceso de traducción.

Se emplea el estándar de nomenclatura de vulnerabilidades CVE (Common Vulnerabilities and Exposures), con el fin de facilitar el intercambio de información entre diferentes bases de datos y herramientas. Cada una de las vulnerabilidades recogidas enlaza a diversas fuentes de información así como a parches disponibles o soluciones aportadas por los fabricantes y desarrolladores. Es posible realizar búsquedas avanzadas teniendo la opción de seleccionar diferentes criterios como el tipo de vulnerabilidad, fabricante, tipo de impacto entre otros, con el fin de acortar los resultados.

Mediante suscripción RSS o Boletines podemos estar informados diariamente de las últimas vulnerabilidades incorporadas al repositorio.

CVE-2026-45696

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, the HTJ2K (High-Throughput JPEG 2000) decoder, ht_undo_impl() in OpenEXRCore is vulnerable to a heap-buffer-overflow READ. The ht_undo_imp function copies decoded pixels out of a per-line OpenJPH buffer using the EXR channel&#39;s declared width as the iteration count. The codestream embedded in the EXR chunk can declare different (smaller) tile/line dimensions than the EXR header advertises, but ht_undo_impl() does not validate this — it pulls width 32-bit samples from cur_line->i32[] without checking the OpenJPH line buffer&#39;s actual length. A crafted EXR file produces a 4-byte heap-buffer-overflow READ immediately after a buffer allocated by ojph::local::codestream::finalize_alloc(). The bug is reachable through the standard scanline-decode entry point used by every consumer of exr_decoding_run/Imf::checkOpenEXRFile, including thumbnailers, asset pipelines, and the exrcheck utility — i.e. any application that opens untrusted EXR files. The result is a deterministic crash (DoS) and potential adjacent-heap leak. This issue has been fixed in version 3.4.12.

Gravedad CVSS v4.0: ALTA

Última modificación:

15/07/2026

CVE-2025-15661

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** libssh2 through 1.11.1, fixed in commit 2dae302, contains an out-of-bounds heap read vulnerability in the sftp_symlink() function in src/sftp.c that allows a malicious SSH server or man-in-the-middle attacker to disclose heap memory contents or cause a crash by sending a crafted SSH_FXP_NAME response. Attackers can supply a link_len value larger than the actual packet data in SSH_FXP_NAME responses for SFTP READLINK and REALPATH operations, triggering a heap buffer over-read of up to target_len minus one bytes due to the missing validation of available packet buffer size before the memcpy operation.

Gravedad CVSS v4.0: ALTA

Última modificación:

14/07/2026

CVE-2026-56099

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** OpenBSD before commit 6a23123 (2026-06-18) contains an out-of-bounds read vulnerability in the mpls_do_error function within sys/netmpls/mpls_input.c that allows remote attackers to disclose kernel stack memory by sending crafted MPLS frames with 16 labels and no Bottom-of-Stack bit set.

Gravedad CVSS v4.0: MEDIA

Última modificación:

14/07/2026

CVE-2026-48980

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** pam_usb provides hardware authentication for Linux using removable media. In versions prior to 0.9.2, getenv() environment variables XRDP_SESSION, DISPLAY and TMUX allow environment variable injection into local-check logic. These environment variables influence whether a current session is local or remote, and a PAM module that runs in the context of setuid binaries (sudo, su), getenv() returns attacker-controlled values whenever the process environment has been manipulated by a local user. This issue has been fixed in version 0.9.2.

Gravedad CVSS v3.1: MEDIA

Última modificación:

22/06/2026

CVE-2026-48981

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** pam_usb provides hardware authentication for Linux using ordinary removable media. In versions prior to 0.9.2, pam_usb calls xmlReadFile() with flags=0 when loading the configuration file, allowing libxml2 to process external entity references (XXE), potentially making outbound network connections or local file reads at XML parse time from the context of the authenticating process. The vulnerability requires the configuration file to contain crafted XML entity references. Since pam_usb.conf is root-owned, direct exploitation requires prior write access to the config, but the defence-in-depth impact is significant given that pam_usb.so runs in setuid contexts (sudo, su). This issue has been fixed in version 0.9.2.

Gravedad CVSS v3.1: MEDIA

Última modificación:

22/06/2026

CVE-2026-48983

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** pam_usb provides hardware authentication for Linux using ordinary removable media. In versions prior to 0.9.2, a symlink race condition exists in per-device and per-user pad directory creation. pam_usb uses a check-then-act pattern: it calls lstat() to test for existence and then calls mkdir() separately to create the directory. A local attacker can win the race between these calls by replacing the target path with a symlink to a directory they control. If successful, one-time pad files may be written to an attacker-controlled location, potentially exposing future pad values before use or disrupting authentication. This issue has been fixed in version 0.9.2.

Gravedad CVSS v3.1: MEDIA

Última modificación:

22/06/2026

CVE-2026-48982

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** pam_usb provides hardware authentication for Linux using ordinary removable media. In versions prior to 0.9.2, when updating a one-time pad file, a temporary file is created using open() without the O_EXCL flag. Without O_EXCL, the create operation is not atomic: two concurrent processes racing to update the same pad may both succeed in opening the file, with the second write silently overwriting the first. The one-time pad is the core replay-prevention mechanism of pam_usb. A successful race could result in the stored pad value diverging from what either process expected, potentially causing authentication failures or, in a precisely timed attack, creating a window for pad reuse. This issue has been fixed in version 0.9.2.

Gravedad CVSS v3.1: MEDIA

Última modificación:

22/06/2026

CVE-2026-43915

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** Coturn is a free open source implementation of TURN and STUN Server. Versions prior to 4.11.0 contain a stored cross-site scripting (XSS) vulnerability in the web-admin HTTPS interface. An attacker who can create a TURN allocation with a crafted USERNAME value can inject HTML/JavaScript that executes when an authenticated web-admin user views the TURN session list. In configurations using anonymous TURN access (--no-auth), this may be exploitable without TURN credentials. In authenticated deployments, exploitation requires valid TURN credentials or control over a provisioned username. This issue has been fixed in version 4.11.0.

Gravedad CVSS v3.1: MEDIA

Última modificación:

26/06/2026

CVE-2026-47846

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** Bitnami Cassandra container images are affected by a retained default superuser vulnerability. When a custom administrator account is configured via the CASSANDRA_USER environment variable, the container initialization script creates the new superuser account but fails to drop the built-in cassandra account in certain scenarios. This leaves the default cassandra:cassandra superuser active as an unintended access path.<br /> <br /> Affected versions — Container image: 4.0.x prior to 4.0.20-photon-5-r7; 4.1.x prior to 4.1.11-photon-5-r7; 5.0.x prior to 5.0.8-photon-5-r4 / 5.0.8-debian-12-r3.

Gravedad CVSS v3.1: CRÍTICA

Última modificación:

22/06/2026

CVE-2026-47847

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** Bitnami MariaDB Galera container images and Helm chart are affected by a hardcoded default credential vulnerability in the Galera replication health-check user. The MARIADB_REPLICATION_USER and MARIADB_REPLICATION_PASSWORD environment variables defaulted to monitor and monitor respectively. This user is granted REPLICATION CLIENT privileges from any host (&#39;%&#39;). The Bitnami Helm chart for MariaDB Galera did not expose parameters to configure this user&#39;s credentials, resulting in all chart deployments using this publicly known credential by default.<br /> <br /> Affected versions — Container image: 10.6.x prior to 10.6.27-photon-5-r0; 10.11.x prior to 10.11.17-photon-5-r1; 11.4.x prior to 11.4.12-photon-5-r0; 11.8.x prior to 11.8.7-photon-5-r1; 12.3.x prior to 12.3.2-photon-5-r0 / 12.3.2-debian-12-r0. Helm chart: prior to 18.3.0.

Gravedad CVSS v3.1: MEDIA

Última modificación:

22/06/2026

CVE-2026-48716

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** nanobot is a personal AI assistant. In versions 0.1.5.post3 and prior, the WhatsApp bridge in bridge/src/whatsapp.ts constructs a filesystem path using the fileName field from an incoming WhatsApp document message without sanitization. The WhatsApp bridge downloads media attachments and writes them to disk using a filename derived from the sender&#39;s message via documentMessage.fileName, which is concatenated with a prefix and its raw value is passed directly to path.join(mediaDir, outFilename). Node.js path.join resolves .. components, allowing an attacker to escape the intended media/ directory by sending a document with a crafted fileName such as ../../../.ssh/authorized_keys. Because the attacker also controls the file content (the downloaded buffer), this is a write-anywhere primitive — both path and content are attacker-controlled. A fix for this issue is planned for version 0.1.5.post4.

Gravedad CVSS v3.1: ALTA

Última modificación:

23/06/2026

CVE-2026-25865

Fecha de publicación:

18/06/2026

Idioma:

Inglés

*** Pendiente de traducción *** Punto Switcher through 4.5.0.583 contains an unquoted search path element vulnerability that allows local attackers to execute arbitrary code by exploiting the application&#39;s call to WinExec without a fully qualified path for RunDll32.exe when invoking shell32.dll Control_RunDLL input.dll. Attackers can place a malicious executable earlier in the search order to achieve arbitrary code execution in the context of the affected user.

Gravedad CVSS v4.0: ALTA

Última modificación:

23/06/2026

Suscribirse a Vulnerabilidades