Vulnerabilidades

*** Pendiente de traducción *** Network-AI, a TypeScript/Node.js multi-agent orchestrator, has a shipped, exported, documented feature called `ApprovalInbox` (`lib/approval-inbox.ts`). It is the network surface of the human-in-the-loop Approval Gate, which `ApprovalGate` uses to require explicit human approval for high-risk operations. The HTTP server it exposes has no authentication of any kind and sets `Access-Control-Allow-Origin: *` on every route, including the state-changing `POST /approvals/:id/approve` and `/deny`. As a result, in versions 5.0.0 through 5.12.1, any party who can send an HTTP request to the inbox port — a co-located process, a container/SSRF on the same host, a remote client when the operator binds a non-loopback address, or any website the operator visits in a browser (via the wildcard CORS) — can enumerate pending approvals and approve them, defeating the entire human-in-the-loop control and causing the gated high-risk action (e.g. a shell command the agent was holding for review) to execute without consent. This issue is fixed in v5.12.2. `ApprovalInbox` now accepts a `secret` option. When set, the mutating endpoints `POST /:id/approve` and `POST /:id/deny` require an `Authorization: Bearer ` header, validated in constant time with `crypto.timingSafeEqual`. `startServer()` already binds to `127.0.0.1` by default; operators exposing the inbox on a network must set a secret.

*** Pendiente de traducción *** xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the processing of Client Control PDUs. During the RDP connection sequence, the parser does not perform sufficient length validation before reading specific data fields from the network stream. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted, truncated Client Control PDU. Due to missing bounds checks, the xrdp process may perform out-of-bounds memory reads, which can result in the termination of the service (Denial of Service). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service.This issue has been fixed in version 0.10.6.1.

*** Pendiente de traducción *** xrdp is an open source RDP server. Versions 0.10.6 and prior contain a vulnerability concerning the processing of RDP Confirm Active PDU, where during the capability negotiation phase, the parser did not perform sufficient length validation for specific capability sets. A remote, unauthenticated attacker could potentially exploit this flaw by sending a specially crafted RDP packet containing malformed capability data. Due to missing bounds checks, the xrdp process may perform out-of-bounds memory reads, which can result in the termination of the service (Denial of Service). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service. This issue has been fixed in version 0.10.6.1.

*** Pendiente de traducción *** xrdp is an open source RDP server. In versions 0.10.6 and prior, a n issue was discovered where the software fails to properly validate the totalLength field within the RDP protocol control header during packet reception. An unauthenticated remote attacker can exploit this vulnerability by sending a specially crafted packet that forces the xrdp process or thread into an infinite, CPU-bound loop. Because the internal pointer fails to advance and the deadlock prevention mechanism is bypassed for specific protocol data unit types, the process consumes excessive CPU resources indefinitely. This can render the xrdp service unavailable and potentially lead to system-wide resource exhaustion if multiple malicious connections are established. This issue has been fixed in version 0.10.6.1.

*** Pendiente de traducción *** A CSRF vulnerability exists in the `zone-include.php` script in Revive Adserver 6.0.7. Linking and unlinking banners or campaigns to zones could be triggered via crafted GET or POST requests without any verification of the CSRF token, allowing an attacker to perform these actions on behalf of an authenticated administrator.

*** Pendiente de traducción *** Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.9.1, the agent sandbox gates shell commands behind an allowlist (`SandboxPolicy.isCommandAllowed`), which THREAT_MODEL.md calls the main control against a compromised agent (Adversary 3.2). The allowlist glob-matches the whole command string, but `ShellExecutor` runs that string through `/bin/sh -c`. So any wildcard allow such as `git *`, `npm *` or `node *` also matches `git status; `, and a scoped command becomes arbitrary execution. The issue is fixed in v5.9.1. `ShellExecutor` now executes via `spawn(file, args, { shell: false })` using a quote-aware parsed argv, so no shell is invoked. `SandboxPolicy.isCommandAllowed` and the new `SandboxPolicy.tokenizeCommand` reject any unquoted shell metacharacter (`; & | $ ` ` ` ( ) { }` newline) or unterminated quote before the allowlist glob match; quoted metacharacters are preserved as literal argument data. Users should upgrade to `network-ai@5.9.1` or later. As defense in depth, avoid broad wildcard allowlist entries such as `node *` / `npm *` which are direct code execution by design.

*** Pendiente de traducción *** In nanomq versions 0.24.11 and earlier, a NULL pointer dereference in `nni_mqttv5_msg_decode_connect()` allows a malicious MQTT broker to crash any connecting NanoMQ MQTTv5 client (including bridge mode) with a single packet, causing remote denial of service via SIGSEGV. In `nni_mqttv5_msg_decode_connect()` (`mqtt_codec.c:1863`), the code iterates over CONNECT properties using variable `prop` when it should use `will_prop`. When a CONNECT packet has no connect-level properties (`prop == NULL`) but has will properties (`will_prop != NULL`), dereferencing `prop-&gt;next` causes SIGSEGV at address `0x38` (NULL + `offsetof(property, next)`).<br /> <br /> This affects both `nanomq_cli` and **NanoMQ bridge mode** (Core component), as both use the same `mqtt_client.c` receive path. This can lead to remote DoS if a malicious MQTT broker can crash the client process with a single 35-byte packet and persistent DoS if auto-reconnect causes infinite crash loop.

*** Pendiente de traducción *** In nanomq versions 0.24.11 and earlier, a NULL pointer dereference in `properties_parse()` allows an authenticated attacker to crash the NanoMQ broker by sending a POST request to `/api/v4/mqtt/publish` with `user_properties` as a JSON array instead of a JSON object. The crash occurs because `strlen()` is called on a NULL `item-&gt;string` pointer when iterating over array elements. An authenticated attacker can exploit this to crash the NanoMQ broker process. This is patched in version 0.24.14.

*** Pendiente de traducción *** Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.4.5, the MCP SSE server defaults to an empty secret (`process.env[&amp;#39;NETWORK_AI_MCP_SECRET&amp;#39;] ?? &amp;#39;&amp;#39;` at `bin/mcp-server.ts:89`), which causes `_isAuthorized` (`lib/mcp-transport-sse.ts:254`) to return `true` unconditionally for every request — no `Authorization` header is required. Simultaneously, `_handleRequest` sets `Access-Control-Allow-Origin: *` (`lib/mcp-transport-sse.ts:272`) on every response, so a cross-origin browser fetch can read the result without restriction. An unauthenticated attacker who can lure a user to a malicious web page can invoke all 22 exposed MCP tools — including `config_set`, `agent_spawn`, and `blackboard_write` — against a default-configured localhost server. Version 5.4.5 patches the issue.

*** Pendiente de traducción *** xrdp is an open source RDP server. Versions 0.10.6 and prior contain a heap out-of-bounds read vulnerability within the FIPS-specific receive paths. This vulnerability does not affect the default configuration of xrdp. The vulnerability is only exploitable when the security layer is set to security_layer=negotiate or security_layer=rdp, and the crypto level is changed to crypt_level=fips in xrdp.ini. In this specific non-default mode, the server fails to validate the FIPS padding length field, leading to a pointer underflow and a subsequent negative length calculation. An unauthenticated remote attacker can exploit this by sending a crafted FIPS-protected PDU, causing a heap out-of-bounds read that results in a process crash and denial of service (DoS). However, since xrdp forks a new process for each connection by default, an out-of-bounds read causing a process crash is unlikely to bring down the entire xrdp service. This issue has been fixed in version 0.10.6.1.

*** Pendiente de traducción *** xrdp is an open source RDP server. Versions 0.10.6 and prior contain a heap-based buffer overflow vulnerability within the virtual channel forwarding mechanism. When forwarding data from a remote client to the internal channel server, the xrdp process utilizes a fixed-size buffer without adequate bounds checking on the incoming payload. An authenticated remote attacker can exploit this flaw by sending a specially crafted virtual channel message that exceeds the buffer capacity, leading to heap memory corruption. This may result in a denial of service or the execution of arbitrary code with the privileges of the xrdp process. This issue has been fixed in version 0.10.6.1.

*** Pendiente de traducción *** WhatsApp MCP Server is a Model Context Protocol (MCP) server for WhatsApp, enabling Claude to read and send WhatsApp messages. Prior to version 0.2.1, the `whatsapp-bridge` HTTP API listens on `127.0.0.1:8080` without authentication and without Host header validation, and the `/api/send` endpoint accepts an absolute `media_path` parameter without confining it to a safe directory. Combined, these issues allow any local process running as the same user as the bridge to send WhatsApp messages from the paired account without authorization; the same caller to read arbitrary files readable by the user (e.g. SSH private keys, browser session data, source code, dotfiles) and exfiltrate them as WhatsApp document attachments; and/or a remote attacker to trigger the same operations via DNS rebinding from a webpage the user visits, since no Host header validation is performed. In MCP environments, "local caller" extends beyond processes the user explicitly launched — sibling MCP servers, IDE extensions, and tool-triggered flows running in the user&amp;#39;s session can act as the effective caller. This issue is fixed in whatsapp-mcp v0.2.1 and corresponding Docker images / release artifacts. Users should upgrade immediately. The fix introduces bearer token authentication on the bridge HTTP API (configured via environment variable, required on all requests, validated with constant-time comparison); host header allow-list validation to prevent DNS rebinding; and confinement of `media_path` to a configured directory, with rejection of absolute paths outside the root and path traversal sequences. This is a breaking change for clients of the bridge API. For users who cannot immediately upgrade: Stop the bridge, or block loopback access to port 8080, when the bridge is not actively in use; avoid running the bridge alongside untrusted MCP servers, browser extensions, or other untrusted local processes; avoid browsing untrusted sites while the bridge is running (DNS rebinding mitigation); and/or run the bridge under a dedicated user account or in a sandbox/container with no access to sensitive files.