Instituto Nacional de ciberseguridad. Sección Incibe
Instituto Nacional de Ciberseguridad. Sección INCIBE-CERT

Vulnerabilidades

Con el objetivo de informar, advertir y ayudar a los profesionales sobre las últimas vulnerabilidades de seguridad en sistemas tecnológicos, ponemos a disposición de los usuarios interesados en esta información una base de datos con información en castellano sobre cada una de las últimas vulnerabilidades documentadas y conocidas.

Este repositorio con más de 75.000 registros esta basado en la información de NVD (National Vulnerability Database) – en función de un acuerdo de colaboración – por el cual desde INCIBE realizamos la traducción al castellano de la información incluida. En ocasiones este listado mostrará vulnerabilidades que aún no han sido traducidas debido a que se recogen en el transcurso del tiempo en el que el equipo de INCIBE realiza el proceso de traducción.

Se emplea el estándar de nomenclatura de vulnerabilidades CVE (Common Vulnerabilities and Exposures), con el fin de facilitar el intercambio de información entre diferentes bases de datos y herramientas. Cada una de las vulnerabilidades recogidas enlaza a diversas fuentes de información así como a parches disponibles o soluciones aportadas por los fabricantes y desarrolladores. Es posible realizar búsquedas avanzadas teniendo la opción de seleccionar diferentes criterios como el tipo de vulnerabilidad, fabricante, tipo de impacto entre otros, con el fin de acortar los resultados.

Mediante suscripción RSS o Boletines podemos estar informados diariamente de las últimas vulnerabilidades incorporadas al repositorio.

CVE-2026-48979

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** PHP Standard Library (PSL) is set of APIs covering async, collections, networking, I/O, cryptography, terminal UI, etc. In versions 6.1.0, 6.1.1 and 6.2.0, the Psl\H2\ServerConnection does not validate that the total bytes received in DATA frames match the content-length header declared in the HEADERS frame, allowing request smuggling. This is in violation of RFC 9113 §8.1.1. A malicious client is able to send more DATA bytes than declared, smuggling additional content past application-level size limits and send fewer DATA bytes than declared and close the stream early, causing applications that trust the declared length to behave incorrectly.<br /> The vulnerability is only reachable for consumers using Psl\H2\ServerConnection directly to accept untrusted client traffic. Consumers of documented high-level PSL APIs are not affected. This issue has been fixed in versions 6.1.2 and 6.2.1.
Gravedad CVSS v3.1: ALTA
Última modificación:
23/06/2026

CVE-2026-48821

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** Shaarli is a personal bookmarking service. Versions 0.16.1 and prior contain a DOM-based Cross-Site Scripting (XSS) vulnerability in the Thumbnail Synchronizer feature. When an administrator runs the thumbnail update process, malicious bookmark titles are returned via an AJAX response and inserted into the DOM using innerHTML without proper sanitization. The issue originates from the interaction between the backend thumbnail update endpoint and the frontend JavaScript responsible for rendering update progress. On the backend, the ThumbnailsController::ajaxUpdate method returns bookmark data formatted using the &amp;#39;raw&amp;#39; formatter. This includes the unescaped bookmark title in the JSON response. On the client side, the script thumbnails-update.js processes this AJAX response and dynamically updates the progress interface. Administrators using the thumbnail synchronization feature are affected and exploitation could lead to session hijacking, privilege escalation, backdoor injection and full compromise. This issue has been fixed in version 0.16.2.
Gravedad CVSS v3.1: MEDIA
Última modificación:
23/06/2026

CVE-2026-49133

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** Typemill before 2.24.0 contains a path traversal vulnerability that allows authenticated attackers with Author-level privileges to read arbitrary files outside the content directory by supplying traversal sequences in the path query parameter passed to Storage::getFile() with an empty folder argument. Attackers can bypass traversal-prevention controls in Storage::getFolderPath() to access sensitive files.
Gravedad CVSS v4.0: ALTA
Última modificación:
14/07/2026

CVE-2026-55201

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** Evil-WinRM through 3.9, fixed in commit 6ecd570, contains a path traversal vulnerability in the download_dir() function that allows a rogue or compromised remote Windows server to write files outside the intended download directory by returning filenames with traversal sequences from Get-ChildItem command output that are passed unsanitized to File.join(). Attackers controlling the remote server can exploit this to overwrite sensitive client-side files such as SSH authorized_keys or shell configuration files, achieving persistent access or privilege escalation on the client machine.
Gravedad CVSS v4.0: ALTA
Última modificación:
14/07/2026

CVE-2026-55202

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** Tinyproxy through 1.11.3, fixed in commit 09312a1, fails to properly validate the Host header during stathost detection, allowing unauthenticated attackers to access the stats page by injecting a matching Host header or bypass detection via port manipulation. Remote attackers can trigger unauthorized access to internal proxy statistics or misroute requests as transparent proxy connections to circumvent access controls.
Gravedad CVSS v4.0: ALTA
Última modificación:
14/07/2026

CVE-2026-55199

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** libssh2 through 1.11.1, fixed in commit 1762685, contains a pre-authentication denial of service vulnerability in the SSH_MSG_EXT_INFO handler in src/packet.c that allows a malicious SSH server to cause a client CPU exhaustion loop by sending a crafted extension count value. A malicious server can set nr_extensions to 0xFFFFFFFF during key exchange, causing the client to spin in a tight CPU loop for over 60 seconds because return values from _libssh2_get_string() are unchecked and the session timeout does not apply to CPU-bound loops.
Gravedad CVSS v4.0: ALTA
Última modificación:
14/07/2026

CVE-2026-55200

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** libssh2 through 1.11.1, fixed in commit 7acf3df contains an out-of-bounds write vulnerability in ssh2_transport_read() that fails to enforce upper bounds on packet_length field. Remote attackers can send crafted SSH packets with excessively large packet_length values to corrupt heap memory and achieve remote code execution.
Gravedad CVSS v4.0: CRÍTICA
Última modificación:
14/07/2026

CVE-2026-54387

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** Tinyproxy through 1.11.3, fixed in commit ff45d3b, fails to reconcile conflicting Content-Length and Transfer-Encoding: chunked headers, forwarding both verbatim to the backend while using Content-Length to determine how many request body bytes to consume. Remote attackers can desynchronize the proxy and backend parser state, allowing injection of arbitrary HTTP requests to the backend to enable cache poisoning, access control bypass, and request hijacking.
Gravedad CVSS v4.0: CRÍTICA
Última modificación:
14/07/2026

CVE-2026-54388

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** Tinyproxy through 1.11.3, fixed in commit 364cdb6, fails to reject requests containing multiple Content-Length headers with differing values, forwarding all duplicate headers to the backend while using the first value to determine how many request body bytes to consume. Remote attackers can desynchronize the proxy and backend parser state, allowing injection of arbitrary HTTP requests to the backend to enable cache poisoning, access control bypass, and request hijacking.
Gravedad CVSS v4.0: CRÍTICA
Última modificación:
14/07/2026

CVE-2026-50107

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** When NGINX Plus or NGINX Open Source is configured as the data plane for NGINX Gateway Fabric, an injection vulnerability exists in the NGINX configuration generator component of NGINX Gateway Fabric. User-supplied string values from the NginxProxy Custom Resource Definition (CRD) access log format setting are rendered directly into NGINX configuration templates without sanitization or escaping. An authenticated attacker with permission to create or modify these CRDs may craft values that inject arbitrary NGINX configuration directives. This is a control plane issue; there is no data plane exposure from the vulnerability trigger itself. <br /> <br /> <br /> Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
Gravedad CVSS v4.0: ALTA
Última modificación:
22/06/2026

CVE-2026-48817

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** Starlette is a lightweight ASGI framework/toolkit. In versions 1.0.1 and below, when dispatching a request, HTTPEndpoint selects the handler by lowercasing the HTTP method and looking it up as an attribute with getattr, without restricting the lookup to a known set of HTTP verbs. When an HTTPEndpoint subclass is registered through Route(...) without an explicit methods= argument, the route does not constrain the method and every method reaches the endpoint. If a non-standard HTTP method whose lowercased name matches an attribute on the endpoint subclass reaches the endpoint, that attribute is invoked as if it were a request handler. An attacker can use this to reach methods that were never meant to be HTTP handlers, such as internal helpers, without the authorization checks applied by the intended public handler. An application (including Starlette-based frameworks like FastAPI) is affected if it registers an HTTPEndpoint subclass via Route(...) without explicitly setting methods=, and that subclass includes extra methods named like non-standard HTTP verbs that take one request argument and return a response. This issue has been fixed in version 1.1.0.
Gravedad CVSS v3.1: MEDIA
Última modificación:
26/06/2026

CVE-2026-48814

Fecha de publicación:
17/06/2026
Idioma:
Inglés
*** Pendiente de traducción *** Network-AI is a TypeScript/Node.js multi-agent orchestrator. In versions 5.7.1 and earlier, the MCP SSE server allows unauthenticated cross-origin MCP tool invocation due to an empty default secret. This issue was partially addressed by CVE-2026-46701 in version 5.4.5 by closing the CORS flaw (with Access-Control-Allow-Origin now set only for localhost origins), but the empty-default-secret flaw described in the title remained: the SSE MCP server still defaulted to an empty secret, _isAuthorized() still returned true when the secret was empty, and a non-loopback bind only produced a warning. As a result, the server still ran fully unauthenticated by default. Any non-browser caller (for example, curl, SSRF, or a 0.0.0.0 bind) could invoke all 22 MCP tools (config_set, agent_spawn, blackboard_write, token_*) with no credentials. This issue was fixed in version 5.7.2.
Gravedad CVSS v3.1: CRÍTICA
Última modificación:
23/06/2026