Vulnerabilidades

Con el objetivo de informar, advertir y ayudar a los profesionales sobre las últimas vulnerabilidades de seguridad en sistemas tecnológicos, ponemos a disposición de los usuarios interesados en esta información una base de datos con información en castellano sobre cada una de las últimas vulnerabilidades documentadas y conocidas.

Este repositorio con más de 75.000 registros esta basado en la información de NVD (National Vulnerability Database) – en función de un acuerdo de colaboración – por el cual desde INCIBE realizamos la traducción al castellano de la información incluida. En ocasiones este listado mostrará vulnerabilidades que aún no han sido traducidas debido a que se recogen en el transcurso del tiempo en el que el equipo de INCIBE realiza el proceso de traducción.

Se emplea el estándar de nomenclatura de vulnerabilidades CVE (Common Vulnerabilities and Exposures), con el fin de facilitar el intercambio de información entre diferentes bases de datos y herramientas. Cada una de las vulnerabilidades recogidas enlaza a diversas fuentes de información así como a parches disponibles o soluciones aportadas por los fabricantes y desarrolladores. Es posible realizar búsquedas avanzadas teniendo la opción de seleccionar diferentes criterios como el tipo de vulnerabilidad, fabricante, tipo de impacto entre otros, con el fin de acortar los resultados.

Mediante suscripción RSS o Boletines podemos estar informados diariamente de las últimas vulnerabilidades incorporadas al repositorio.

CVE-2026-81033

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** Automatisch reveals whether an address is registered through the response to its forgot-password request. The controller at packages/backend/src/controllers/internal/api/v1/users/forgot-password.js looks the address up and chains a not-found throw onto the query, so an address with no account raises an error that the global handler renders as a not-found status, while a registered address proceeds to send the reset message and returns no-content. The route is mounted without authentication. Submitting candidate addresses and comparing the two status codes therefore establishes which addresses hold accounts, with no credential and no rate limiting in the path.

Gravedad CVSS v4.0: MEDIA

Última modificación:

28/08/2026

CVE-2026-81027

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** one-api gates one of its two channel-pinning paths and not the other. middleware/auth.go permits a request to name a specific channel either through a suffix on the API key or through a URL path parameter. The suffix path is reached only after model.IsAdmin succeeds and otherwise rejects the caller, while the path-parameter branch sets the selected-channel value from c.Param("channelid") with no role check at all. The route carrying that parameter sits behind token authentication only, so any account holding a valid API token reaches it. The value flows to the distributor, which loads the channel by integer identifier with no scoping to the caller&#39;s user or group, and then sets the outbound Authorization header to that channel&#39;s stored key and directs the request at the channel&#39;s base URL. A low-privilege account can therefore pin any channel by incrementing an identifier, causing the server to make upstream requests bearing an operator-configured provider key the account was never granted, and bypassing both the per-group restriction and the channel&#39;s model allowlist.

Gravedad CVSS v4.0: ALTA

Última modificación:

26/08/2026

CVE-2026-81029

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** OpenMetadata accepts a caller-supplied post-authentication redirect target and appends the issued token to it. SamlLoginServlet reads the callback request parameter and stores it in the HTTP session without comparing it against any configured or registered destination, and the assertion consumer servlet later formats that stored value into a URL carrying the freshly issued JWT together with the account&#39;s email and name before sending the redirect. The OIDC and OAuth2 handler follows the same pattern with its own redirect parameter and the issued identity token. A request naming a destination the attacker controls therefore causes the server to deliver a valid token for whoever completes the login to that destination. Because the token authenticates API calls as that account, a user who follows such a link and authenticates hands over control of their account. Version 2.0.0 removes the caller-supplied callback parameter; no 1.x release validates it.

Gravedad CVSS v4.0: ALTA

Última modificación:

26/08/2026

CVE-2026-81030

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** Mage AI does not confine the paths accepted by its browser-items API to the project directory. BrowserItemResource in mage_ai/api/resources/BrowserItemResource.py passes a caller-supplied path to the filesystem read and write helpers without calling the containment helper that the sibling FileContentResource and FileResource classes both use, so the resource contains no such call while those two contain several. A user holding the Viewer role, which grants read access within the project and nothing outside it, can therefore read any file the server process can read by supplying an absolute path. The permission model that would otherwise separate roles is not consulted for this route in the default configuration, because the setting that enables it defaults to false. Callers holding the Editor role additionally write through the same unconfined path, though that role is already able to execute code by design, so the boundary crossed by this flaw is the read available to the Viewer role.

Gravedad CVSS v4.0: ALTA

Última modificación:

26/08/2026

CVE-2026-80428

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** ILIAS deserialises stored session data for an unauthenticated caller. The Shibboleth back-channel endpoint at components/ILIAS/AuthShibboleth/resources/shib_logout.php runs in a context that ilInitialisation exempts from authentication, and its logout-notification handler locates the session to terminate by reading every live row of the session table and passing each row&#39;s stored data to a hand-written parser that calls unserialize without restricting which classes may be constructed. Any serialised object present in any session row is therefore instantiated on behalf of an anonymous request, and object destructors run when those objects are discarded. A serialised object can be placed into a session row without logging in, because the LTI authentication entry point stores request parameters into the session and is reachable on a path the same initialisation code exempts from authentication. A class bundled with the application writes a JSON-encoded structure to a file named by one of its own properties when it is destroyed, which places attacker-controlled content at an attacker-chosen path below the web root and results in code execution as the web server user. Versions 9.22, 10.10 and 11.3 remove the endpoint&#39;s logout-notification implementation.

Gravedad CVSS v4.0: CRÍTICA

Última modificación:

29/08/2026

CVE-2026-81031

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** IDURAR ERP CRM changes the password of whichever account a request names rather than the account making the request. The update handler in backend/src/controllers/middlewaresControllers/createUserController/updatePassword.js resolves the authenticated user from the request that the token middleware populated, then issues its update against a filter built from the identifier in the URL path, and never compares the two. The route is mounted behind the administrator token check only, so any valid administrator session is sufficient, and the sole ownership-like guard in the handler rejects a single hardcoded demo address. A caller can therefore set an arbitrary password on any other administrator account and sign in as it. The read handler in the same controller directory accepts an identifier the same way, which supplies the identifiers needed to pick a target.

Gravedad CVSS v4.0: ALTA

Última modificación:

29/08/2026

CVE-2026-81028

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** ZLMediaKit confines the downloadFile API to a configured set of root directories with a prefix comparison that does not account for directory boundaries. The configuration loader in server/WebApi.cpp builds each root with File::absolutePath("", item, true); because the relative-path argument is empty that helper returns the value without a trailing separator. The handler then accepts a requested path when start_with(file_path, root) holds, so a sibling directory whose name merely begins with the configured root string satisfies the test and is served. The only other guard rejects a path containing two dots, which this requires none of. The equivalent confinement check for the ordinary static file server in src/Http/HttpFileManager.cpp computes its root with a non-empty second argument, which appends the separator before comparing, and so is not affected. The endpoint requires the configured API secret, so this grants no privilege beyond what that secret already implies, but it reads files outside the directory the operator confined it to, and the reference container runs the server as root.

Gravedad CVSS v4.0: MEDIA

Última modificación:

28/08/2026

CVE-2026-80426

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** FiftyOne renders a dataset field&#39;s description as markup. The sidebar field-information component at app/packages/core/src/components/FieldLabelAndInfo/index.tsx passes the description string to React&#39;s dangerouslySetInnerHTML, and no layer between storage and render escapes or sanitises it; the neighbouring info values in the same component are rendered as React children and are escaped, so the description is the only raw path. A description is free-form text held in the dataset schema, so it persists in the database and travels with an exported or published dataset. Opening a dataset obtained from another party and hovering the field runs the stored markup in the application&#39;s origin. That origin is shared with the FiftyOne server, whose media route returns the contents of a caller-named absolute path and which is unauthenticated in the open-source server, so the injected script can read local files and reach the dataset and operator endpoints as the viewing user.

Gravedad CVSS v4.0: ALTA

Última modificación:

26/08/2026

CVE-2026-80427

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** bestzip builds the argument list for the system zip utility without separating options from operands. The destination archive path and the caller-supplied source paths are passed to the child process with no -- delimiter between them, so any source entry beginning with a hyphen is interpreted by zip as an option rather than a file name. zip accepts -T to test the finished archive and -TT to name the command used to perform that test, so a source list containing those two entries and a command string causes zip to run that command through a shell once the archive has been written. An application that passes a file name or path it received from an untrusted source into the bestzip API therefore executes a command of the supplier&#39;s choosing. Versions 2.2.6 and 3.0.2 add the delimiter.

Gravedad CVSS v4.0: ALTA

Última modificación:

26/08/2026

CVE-2026-54614

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** DebugKit provides a debugging toolbar for CakePHP applications. Prior to 4.10.3 and 5.2.4, the DebugKit MailPreview feature in src/Controller/MailPreviewController.php accepts a route-controlled previewName value in findPreview and passes the resolved class from App::className() to constructor execution without rejecting namespace separators or verifying that the class extends DebugKit\Mailer\MailPreview. An attacker able to access DebugKit while debug mode is enabled and the request hostname is local or allowlisted can select an unintended application class through the mail-preview preview route, resulting in arbitrary constructor execution and limited disclosure of application information. This issue is fixed in versions 4.10.3 and 5.2.4.

Gravedad CVSS v3.1: MEDIA

Última modificación:

29/08/2026

CVE-2026-54569

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** SENAITE.CORE is the core framework for the SENAITE laboratory information management system. From 2.0.0 to 2.6.0, the SENAITE.CORE JSON API permits unauthenticated remote code execution through a two-request chain involving missing authorization and unsafe evaluation. The state-changing routes in src/bika/lims/jsonapi/update.py, including update, update_many, remove, doActionFor, doActionFor_many, and getusers, do not enforce the senaite.core: Access JSON API permission before resolving attacker-selected objects. In src/bika/lims/jsonapi/init.py, set_fields_from_request passes raw request values for RecordsField and RecordField instances to eval() before field mutator write-permission checks execute. An anonymous attacker can discover the bika_setup object identifier through @@uuid, send a value such as RejectionReasons to /@@API/update, and execute arbitrary Python in the Zope worker before a later mutation failure rolls back ZODB changes. The same unsafe evaluation pattern is present in src/senaite/core/browser/fields/record.py and src/senaite/core/browser/fields/records.py. Successful exploitation can expose or modify laboratory data, files, and accounts and can disrupt the service.

Gravedad CVSS v3.1: CRÍTICA

Última modificación:

26/08/2026

CVE-2026-54606

Fecha de publicación:

26/08/2026

Idioma:

Inglés

*** Pendiente de traducción *** SunEditor is a lightweight and powerful WYSIWYG editor in vanilla JavaScript with no dependencies. Prior to 3.1.4, the SunEditor Embed plugin in src/plugins/modal/embed.js parses attacker-controlled raw embed HTML with DOMParser and processes the resulting DOM nodes. When an external script element follows a valid iframe, the plugin recreates a script element from the attacker-controlled src attribute and appends it to the live DOM, causing JavaScript execution in the editor page. If an application stores or reflects SunEditor content without additional backend sanitization, an attacker who can submit embed HTML can trigger stored or reflected cross-site scripting when another user opens, previews, renders, or edits the content, enabling access to page data and account actions as the victim. This issue is fixed in version 3.1.4.

Gravedad CVSS v4.0: ALTA

Última modificación:

26/08/2026

Suscribirse a Vulnerabilidades