Vulnerabilidades

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> fbdev: udlfb: Fix endpoint check<br /> <br /> The syzbot fuzzer detected a problem in the udlfb driver, caused by an<br /> endpoint not having the expected type:<br /> <br /> usb 1-1: Read EDID byte 0 failed: -71<br /> usb 1-1: Unable to get valid EDID from device/display<br /> ------------[ cut here ]------------<br /> usb 1-1: BOGUS urb xfer, pipe 3 != type 1<br /> WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880<br /> drivers/usb/core/urb.c:504<br /> Modules linked in:<br /> CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted<br /> 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0<br /> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google<br /> 04/28/2023<br /> Workqueue: usb_hub_wq hub_event<br /> RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504<br /> ...<br /> Call Trace:<br /> <br /> dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980<br /> dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315<br /> dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111<br /> dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743<br /> <br /> The current approach for this issue failed to catch the problem<br /> because it only checks for the existence of a bulk-OUT endpoint; it<br /> doesn&amp;#39;t check whether this endpoint is the one that the driver will<br /> actually use.<br /> <br /> We can fix the problem by instead checking that the endpoint used by<br /> the driver does exist and is bulk-OUT.

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> s390/vmem: split pages when debug pagealloc is enabled<br /> <br /> Since commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled")<br /> the kernel crashes early during boot when debug pagealloc is enabled:<br /> <br /> mem auto-init: stack:off, heap alloc:off, heap free:off<br /> addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC<br /> Modules linked in:<br /> CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 #630<br /> [..]<br /> Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e<br /> 00000000001325fc: eb880002000c srlg %r8,%r8,2<br /> #0000000000132602: b2210051 ipte %r5,%r1,%r0,0<br /> &gt;0000000000132606: b90400d1 lgr %r13,%r1<br /> 000000000013260a: 41605008 la %r6,8(%r5)<br /> 000000000013260e: a7db1000 aghi %r13,4096<br /> 0000000000132612: b221006d ipte %r6,%r13,%r0,0<br /> 0000000000132616: e3d0d0000171 lay %r13,4096(%r13)<br /> <br /> Call Trace:<br /> __kernel_map_pages+0x14e/0x320<br /> __free_pages_ok+0x23a/0x5a8)<br /> free_low_memory_core_early+0x214/0x2c8<br /> memblock_free_all+0x28/0x58<br /> mem_init+0xb6/0x228<br /> mm_core_init+0xb6/0x3b0<br /> start_kernel+0x1d2/0x5a8<br /> startup_continue+0x36/0x40<br /> Kernel panic - not syncing: Fatal exception: panic_on_oops<br /> <br /> This is caused by using large mappings on machines with EDAT1/EDAT2. Add<br /> the code to split the mappings into 4k pages if debug pagealloc is enabled<br /> by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel<br /> command line option.

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> MIPS: fw: Allow firmware to pass a empty env<br /> <br /> fw_getenv will use env entry to determine style of env,<br /> however it is legal for firmware to just pass a empty list.<br /> <br /> Check if first entry exist before running strchr to avoid<br /> null pointer dereference.

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> cifs: fix potential race when tree connecting ipc<br /> <br /> Protect access of TCP_Server_Info::hostname when building the ipc tree<br /> name as it might get freed in cifsd thread and thus causing an<br /> use-after-free bug in __tree_connect_dfs_target(). Also, while at it,<br /> update status of IPC tcon on success and then avoid any extra tree<br /> connects.

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> drm/nouveau/kms/nv50-: init hpd_irq_lock for PIOR DP<br /> <br /> Fixes OOPS on boards with ANX9805 DP encoders.

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> fs/sysv: Null check to prevent null-ptr-deref bug<br /> <br /> sb_getblk(inode-&gt;i_sb, parent) return a null ptr and taking lock on<br /> that leads to the null-ptr-deref bug.

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> ipv6: Fix an uninit variable access bug in __ip6_make_skb()<br /> <br /> Syzbot reported a bug as following:<br /> <br /> =====================================================<br /> BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline]<br /> BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline]<br /> BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline]<br /> BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956<br /> arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline]<br /> arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline]<br /> atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline]<br /> __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956<br /> ip6_finish_skb include/net/ipv6.h:1122 [inline]<br /> ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987<br /> rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579<br /> rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922<br /> inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827<br /> sock_sendmsg_nosec net/socket.c:714 [inline]<br /> sock_sendmsg net/socket.c:734 [inline]<br /> ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476<br /> ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530<br /> __sys_sendmsg net/socket.c:2559 [inline]<br /> __do_sys_sendmsg net/socket.c:2568 [inline]<br /> __se_sys_sendmsg net/socket.c:2566 [inline]<br /> __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566<br /> do_syscall_x64 arch/x86/entry/common.c:50 [inline]<br /> do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80<br /> entry_SYSCALL_64_after_hwframe+0x63/0xcd<br /> <br /> Uninit was created at:<br /> slab_post_alloc_hook mm/slab.h:766 [inline]<br /> slab_alloc_node mm/slub.c:3452 [inline]<br /> __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491<br /> __do_kmalloc_node mm/slab_common.c:967 [inline]<br /> __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988<br /> kmalloc_reserve net/core/skbuff.c:492 [inline]<br /> __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565<br /> alloc_skb include/linux/skbuff.h:1270 [inline]<br /> __ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684<br /> ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854<br /> rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915<br /> inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827<br /> sock_sendmsg_nosec net/socket.c:714 [inline]<br /> sock_sendmsg net/socket.c:734 [inline]<br /> ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476<br /> ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530<br /> __sys_sendmsg net/socket.c:2559 [inline]<br /> __do_sys_sendmsg net/socket.c:2568 [inline]<br /> __se_sys_sendmsg net/socket.c:2566 [inline]<br /> __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566<br /> do_syscall_x64 arch/x86/entry/common.c:50 [inline]<br /> do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80<br /> entry_SYSCALL_64_after_hwframe+0x63/0xcd<br /> <br /> It is because icmp6hdr does not in skb linear region under the scenario<br /> of SOCK_RAW socket. Access icmp6_hdr(skb)-&gt;icmp6_type directly will<br /> trigger the uninit variable access bug.<br /> <br /> Use a local variable icmp6_type to carry the correct value in different<br /> scenarios.

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer()<br /> <br /> &amp;#39;read&amp;#39; is freed when it is known to be NULL, but not when a read error<br /> occurs.<br /> <br /> Revert the logic to avoid a small leak, should a m920x_read() call fail.

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT<br /> <br /> lppaca_shared_proc() takes a pointer to the lppaca which is typically<br /> accessed through get_lppaca(). With DEBUG_PREEMPT enabled, this leads<br /> to checking if preemption is enabled, for example:<br /> <br /> BUG: using smp_processor_id() in preemptible [00000000] code: grep/10693<br /> caller is lparcfg_data+0x408/0x19a0<br /> CPU: 4 PID: 10693 Comm: grep Not tainted 6.5.0-rc3 #2<br /> Call Trace:<br /> dump_stack_lvl+0x154/0x200 (unreliable)<br /> check_preemption_disabled+0x214/0x220<br /> lparcfg_data+0x408/0x19a0<br /> ...<br /> <br /> This isn&amp;#39;t actually a problem however, as it does not matter which<br /> lppaca is accessed, the shared proc state will be the same.<br /> vcpudispatch_stats_procfs_init() already works around this by disabling<br /> preemption, but the lparcfg code does not, erroring any time<br /> /proc/powerpc/lparcfg is accessed with DEBUG_PREEMPT enabled.<br /> <br /> Instead of disabling preemption on the caller side, rework<br /> lppaca_shared_proc() to not take a pointer and instead directly access<br /> the lppaca, bypassing any potential preemption checks.<br /> <br /> [mpe: Rework to avoid needing a definition in paca.h and lppaca.h]

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> debugobjects: Don&amp;#39;t wake up kswapd from fill_pool()<br /> <br /> syzbot is reporting a lockdep warning in fill_pool() because the allocation<br /> from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM)<br /> and therefore tries to wake up kswapd, which acquires kswapd_wait::lock.<br /> <br /> Since fill_pool() might be called with arbitrary locks held, fill_pool()<br /> should not assume that acquiring kswapd_wait::lock is safe.<br /> <br /> Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for<br /> !__GFP_DIRECT_RECLAIM allocation.

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> SUNRPC: double free xprt_ctxt while still in use<br /> <br /> When an RPC request is deferred, the rq_xprt_ctxt pointer is moved out<br /> of the svc_rqst into the svc_deferred_req.<br /> When the deferred request is revisited, the pointer is copied into<br /> the new svc_rqst - and also remains in the svc_deferred_req.<br /> <br /> In the (rare?) case that the request is deferred a second time, the old<br /> svc_deferred_req is reused - it still has all the correct content.<br /> However in that case the rq_xprt_ctxt pointer is NOT cleared so that<br /> when xpo_release_xprt is called, the ctxt is freed (UDP) or possible<br /> added to a free list (RDMA).<br /> When the deferred request is revisited for a second time, it will<br /> reference this ctxt which may be invalid, and the free the object a<br /> second time which is likely to oops.<br /> <br /> So change svc_defer() to *always* clear rq_xprt_ctxt, and assert that<br /> the value is now stored in the svc_deferred_req.

*** Pendiente de traducción *** In the Linux kernel, the following vulnerability has been resolved:<br /> <br /> media: usb: siano: Fix use after free bugs caused by do_submit_urb<br /> <br /> There are UAF bugs caused by do_submit_urb(). One of the KASan reports<br /> is shown below:<br /> <br /> [ 36.403605] BUG: KASAN: use-after-free in worker_thread+0x4a2/0x890<br /> [ 36.406105] Read of size 8 at addr ffff8880059600e8 by task kworker/0:2/49<br /> [ 36.408316]<br /> [ 36.408867] CPU: 0 PID: 49 Comm: kworker/0:2 Not tainted 6.2.0-rc3-15798-g5a41237ad1d4-dir8<br /> [ 36.411696] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g15584<br /> [ 36.416157] Workqueue: 0x0 (events)<br /> [ 36.417654] Call Trace:<br /> [ 36.418546] <br /> [ 36.419320] dump_stack_lvl+0x96/0xd0<br /> [ 36.420522] print_address_description+0x75/0x350<br /> [ 36.421992] print_report+0x11b/0x250<br /> [ 36.423174] ? _raw_spin_lock_irqsave+0x87/0xd0<br /> [ 36.424806] ? __virt_addr_valid+0xcf/0x170<br /> [ 36.426069] ? worker_thread+0x4a2/0x890<br /> [ 36.427355] kasan_report+0x131/0x160<br /> [ 36.428556] ? worker_thread+0x4a2/0x890<br /> [ 36.430053] worker_thread+0x4a2/0x890<br /> [ 36.431297] ? worker_clr_flags+0x90/0x90<br /> [ 36.432479] kthread+0x166/0x190<br /> [ 36.433493] ? kthread_blkcg+0x50/0x50<br /> [ 36.434669] ret_from_fork+0x22/0x30<br /> [ 36.435923] <br /> [ 36.436684]<br /> [ 36.437215] Allocated by task 24:<br /> [ 36.438289] kasan_set_track+0x50/0x80<br /> [ 36.439436] __kasan_kmalloc+0x89/0xa0<br /> [ 36.440566] smsusb_probe+0x374/0xc90<br /> [ 36.441920] usb_probe_interface+0x2d1/0x4c0<br /> [ 36.443253] really_probe+0x1d5/0x580<br /> [ 36.444539] __driver_probe_device+0xe3/0x130<br /> [ 36.446085] driver_probe_device+0x49/0x220<br /> [ 36.447423] __device_attach_driver+0x19e/0x1b0<br /> [ 36.448931] bus_for_each_drv+0xcb/0x110<br /> [ 36.450217] __device_attach+0x132/0x1f0<br /> [ 36.451470] bus_probe_device+0x59/0xf0<br /> [ 36.452563] device_add+0x4ec/0x7b0<br /> [ 36.453830] usb_set_configuration+0xc63/0xe10<br /> [ 36.455230] usb_generic_driver_probe+0x3b/0x80<br /> [ 36.456166] printk: console [ttyGS0] disabled<br /> [ 36.456569] usb_probe_device+0x90/0x110<br /> [ 36.459523] really_probe+0x1d5/0x580<br /> [ 36.461027] __driver_probe_device+0xe3/0x130<br /> [ 36.462465] driver_probe_device+0x49/0x220<br /> [ 36.463847] __device_attach_driver+0x19e/0x1b0<br /> [ 36.465229] bus_for_each_drv+0xcb/0x110<br /> [ 36.466466] __device_attach+0x132/0x1f0<br /> [ 36.467799] bus_probe_device+0x59/0xf0<br /> [ 36.469010] device_add+0x4ec/0x7b0<br /> [ 36.470125] usb_new_device+0x863/0xa00<br /> [ 36.471374] hub_event+0x18c7/0x2220<br /> [ 36.472746] process_one_work+0x34c/0x5b0<br /> [ 36.474041] worker_thread+0x4b7/0x890<br /> [ 36.475216] kthread+0x166/0x190<br /> [ 36.476267] ret_from_fork+0x22/0x30<br /> [ 36.477447]<br /> [ 36.478160] Freed by task 24:<br /> [ 36.479239] kasan_set_track+0x50/0x80<br /> [ 36.480512] kasan_save_free_info+0x2b/0x40<br /> [ 36.481808] ____kasan_slab_free+0x122/0x1a0<br /> [ 36.483173] __kmem_cache_free+0xc4/0x200<br /> [ 36.484563] smsusb_term_device+0xcd/0xf0<br /> [ 36.485896] smsusb_probe+0xc85/0xc90<br /> [ 36.486976] usb_probe_interface+0x2d1/0x4c0<br /> [ 36.488303] really_probe+0x1d5/0x580<br /> [ 36.489498] __driver_probe_device+0xe3/0x130<br /> [ 36.491140] driver_probe_device+0x49/0x220<br /> [ 36.492475] __device_attach_driver+0x19e/0x1b0<br /> [ 36.493988] bus_for_each_drv+0xcb/0x110<br /> [ 36.495171] __device_attach+0x132/0x1f0<br /> [ 36.496617] bus_probe_device+0x59/0xf0<br /> [ 36.497875] device_add+0x4ec/0x7b0<br /> [ 36.498972] usb_set_configuration+0xc63/0xe10<br /> [ 36.500264] usb_generic_driver_probe+0x3b/0x80<br /> [ 36.501740] usb_probe_device+0x90/0x110<br /> [ 36.503084] really_probe+0x1d5/0x580<br /> [ 36.504241] __driver_probe_device+0xe3/0x130<br /> [ 36.505548] driver_probe_device+0x49/0x220<br /> [ 36.506766] __device_attach_driver+0x19e/0x1b0<br /> [ 36.508368] bus_for_each_drv+0xcb/0x110<br /> [ 36.509646] __device_attach+0x132/0x1f0<br /> [ 36.510911] bus_probe_device+0x59/0xf0<br /> [ 36.512103] device_add+0x4ec/0x7b0<br /> [ 36.513215] usb_new_device+0x863/0xa00<br /> [ 36.514736] hub_event+0x18c7/0x2220<br /> [ 36.516130] process_one_work+<br /> ---truncated---